Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
7saum
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="bigngreen" data-source="post: 1320936" data-attributes="member: 13632"><p><strong>Re: Anybody shooting 195 EOL in 7SAUM w/ H-1000?</strong></p><p></p><p>All I know is when I seat bullets to touch the rifling using a chamber gauge where the bullets end up, I have done seating tests on the 175EH, 180 HVLD, 180 Hybrid, 195 EH, 180 ELDM, 177 Hammer and 183 Matchkings. A dummy round is the only way to really nail seating because there is also the interaction with the lead angle and the ogive.</p><p>You do not want the bullet to seat at the neck shoulder junction with a lot of these bullets, if you measure there is a pressure ring at the bottom of the bearing surface so you don't want that seating at that edge so I set them up so the bullet seated with some jump will be above this junction OR down much deeper so the bullet is moving through it.</p></blockquote><p></p>
[QUOTE="bigngreen, post: 1320936, member: 13632"] [b]Re: Anybody shooting 195 EOL in 7SAUM w/ H-1000?[/b] All I know is when I seat bullets to touch the rifling using a chamber gauge where the bullets end up, I have done seating tests on the 175EH, 180 HVLD, 180 Hybrid, 195 EH, 180 ELDM, 177 Hammer and 183 Matchkings. A dummy round is the only way to really nail seating because there is also the interaction with the lead angle and the ogive. You do not want the bullet to seat at the neck shoulder junction with a lot of these bullets, if you measure there is a pressure ring at the bottom of the bearing surface so you don't want that seating at that edge so I set them up so the bullet seated with some jump will be above this junction OR down much deeper so the bullet is moving through it. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
7saum
Top