Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
7mm saum
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Shortmagman" data-source="post: 392248" data-attributes="member: 10723"><p>My Model 700 had some of the same problems. I would start working up a load and before I reached the published max. I would get the shinny extractor mark on the case head. I never figured out the problem but sometime later my extractor started to fail. It would not extract the fired cases. I took my gun to a local gunsmith and had him replace the extractor. Once this was done I have gotten no shinny marks on the cases. I think now that my extractor was not installed correctly. You may have the same problem. I would have a "smith" check it out.</p></blockquote><p></p>
[QUOTE="Shortmagman, post: 392248, member: 10723"] My Model 700 had some of the same problems. I would start working up a load and before I reached the published max. I would get the shinny extractor mark on the case head. I never figured out the problem but sometime later my extractor started to fail. It would not extract the fired cases. I took my gun to a local gunsmith and had him replace the extractor. Once this was done I have gotten no shinny marks on the cases. I think now that my extractor was not installed correctly. You may have the same problem. I would have a "smith" check it out. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
7mm saum
Top