What about the 7WSM? Hornady has been turning out some quality brass for it. I just built one and really enjoy it.
7mm SAUM Build 2nd thoughts - Move to a 7MM PRC?? Your expert opinions appreciated...
- Thread starter JustAnOldCooter
- Start date
Help Support Long Range Hunting Forum
I hear ya. I'm just not a fan of their short neck...was hoping to take advantage of the longer neck and shoulder angle to assist in reducing throat torch and improve maintaining bullet concentrically when chambering from magazine.
Justice1327
Well-Known Member
These are fantastic - Many thanks!! Sure like the idea of the extra powder capacity vs seating depth for a 7-300PRC over a 7PRC...
Weatherby Fan
Well-Known Member
The 7mm PRC will be well supported but may take a few months, Hornady says introducing it in Oct, I hear Oct 14th ?
I spoke to Peterson Cartridge Company, they are going into brass production in January for the 7 PRC, so may see it February or March, I bought 50 pieces of RCC brass....stupid expensive but having a 7mm PRC built this week so wanted some brass to be able to shoot the rifle,
I have a set of Whidden dies in the mail, Redding also has die sets to order, nice to see companies supporting this cartridge before its even announced.
My first build will be on a Sako A7 300 win mag donor rifle with a 24 inch #@ contour 1-8 twist benchmark Barrel.
I spoke to Peterson Cartridge Company, they are going into brass production in January for the 7 PRC, so may see it February or March, I bought 50 pieces of RCC brass....stupid expensive but having a 7mm PRC built this week so wanted some brass to be able to shoot the rifle,
I have a set of Whidden dies in the mail, Redding also has die sets to order, nice to see companies supporting this cartridge before its even announced.
My first build will be on a Sako A7 300 win mag donor rifle with a 24 inch #@ contour 1-8 twist benchmark Barrel.
Very nice. Looks like a Hornady high end commercial. Where's my cigar and Bourbon?The 7mm PRC will be well supported but may take a few months, Hornady says introducing it in Oct, I hear Oct 14th ?
I spoke to Peterson Cartridge Company, they are going into brass production in January for the 7 PRC, so may see it February or March, I bought 50 pieces of RCC brass....stupid expensive but having a 7mm PRC built this week so wanted some brass to be able to shoot the rifle,
I have a set of Whidden dies in the mail, Redding also has die sets to order, nice to see companies supporting this cartridge before its even announced.
My first build will be on a Sako A7 300 win mag donor rifle with a 24 inch #@ contour 1-8 twist benchmark Barrel.
Those ABLRs look like the may be the leaning tower of concentricity.
Weatherby Fan
Well-Known Member
Those are actually 160gr Accubonds and one 175gr Berger Elite Hunter, I just seated them at 3.337" (3.340") to see how they fit in the mag box from the SAKO A7 300 win mag donor, and to see if they would feed and was no issue at all.Very nice. Looks like a Hornady high end commercial. Where's my cigar and Bourbon?
Those ABLRs look like the may be the leaning tower of concentricity.
