7Finger Rifle Chassis

7fingers

Member
Joined
Dec 15, 2013
Messages
19
I have just finished my tactical rifle using our 7Finger Gen II pistol chassis with our butt stock adapter and Magpul stock. I used a 28"CBI barrel chambered in 6.5x47 Lapua. What makes this option nice is the fact that if you decide you want to build a rifle and don't want the added expense of another chassis you simply bolt the adapter to the pistol chassis and mount your rifle action and barrel, then it's off to the range or hunt. Any thoughts?
7dd7ccc4ce9e2bf5ed19e7a9ecf6336d_zps02f88be4.jpg

4d00bb07d5893c3f2b2d0cf0eaab3eaf_zps56810dde.jpg

4ff1a0386f299f400656acd12fcea196_zpsf33a38e5.jpg
 
I'd want the bipod at least a foot forward. That will make it easier to get a steady aim. Accuracy can't be better than your ability to hold a steady aim.
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top