Terry Scott
Well-Known Member
Ordered the dies
Still need some cases
Even enough to do load development would help
Still need some cases
Even enough to do load development would help
-
You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.
We offer multiple options to become a Supporting Member here.
SOLD/EXPIRED 6XC brass and dies needed
- Thread starter Terry Scott
- Start date
Help Support Long Range Hunting Forum
Terry,
It looks like we are in the same boat, I've got a rifle out being rebarreled in 6XC. It was a bit of a challenge to get all the components to reload with. I think I got the last of the brass Tubbs had for sale. All the reading I have done seems to indicate the Norma brass is good for around 20 reloads. I've also read that its a good idea to square up the primer pockets.
There is a lot of reloading data online, Accurate Shooter has a page on the 6XC that has several links to loads of info.
Good Luck
It looks like we are in the same boat, I've got a rifle out being rebarreled in 6XC. It was a bit of a challenge to get all the components to reload with. I think I got the last of the brass Tubbs had for sale. All the reading I have done seems to indicate the Norma brass is good for around 20 reloads. I've also read that its a good idea to square up the primer pockets.
There is a lot of reloading data online, Accurate Shooter has a page on the 6XC that has several links to loads of info.
Good Luck
Terry Scott
Well-Known Member
Thx
Let me know if you run on to any brass
Let me know if you run on to any brass
In response to jivandersnick question on the twist I shoot with my XC Carbon it's a 7 1/2 twist. Just finished building a 6 AI and research indicated a 7 1/2 or 7 twist to get best results with 115 VLD's or DTAC's. 105's seem to work fine with an 8 but 7 1/2 looked better for the 115's
