Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5X284 Help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Willys46" data-source="post: 300703" data-attributes="member: 6536"><p>I have a reloading issue that I would like some feedback.</p><p></p><p>Shooting a 6.5X284 Norma, Lapua Brass, 49gr H4350 Fed 210m. Velocity is running 3033.</p><p></p><p>The issues is with the brass. I am using a Neil Jones bushing Die, bumping the shoulder back .002 but it is chambering hard and has a horrible CLICK right at the top of the bolt lift. Rem 700 action. Loaded rounds have the same click on extraction.</p><p></p><p>It looks like the case web area has expanded after three firings and the die will not size the area. I was doing some measuring and comparing to the reamer print and the numbers seem to be very close. </p><p></p><p>Is this a simple case of needing to full length size the brass? Or am I missing something really simple.</p><p></p><p>Thanks for the help</p><p></p><p>Willys46 </p><p>AKA..Cody</p></blockquote><p></p>
[QUOTE="Willys46, post: 300703, member: 6536"] I have a reloading issue that I would like some feedback. Shooting a 6.5X284 Norma, Lapua Brass, 49gr H4350 Fed 210m. Velocity is running 3033. The issues is with the brass. I am using a Neil Jones bushing Die, bumping the shoulder back .002 but it is chambering hard and has a horrible CLICK right at the top of the bolt lift. Rem 700 action. Loaded rounds have the same click on extraction. It looks like the case web area has expanded after three firings and the die will not size the area. I was doing some measuring and comparing to the reamer print and the numbers seem to be very close. Is this a simple case of needing to full length size the brass? Or am I missing something really simple. Thanks for the help Willys46 AKA..Cody [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5X284 Help
Top