Randy Tidwell Well-Known Member Joined Feb 14, 2019 Messages 520 Location OKC. OK. Escaped from CA in Dec 2019 May 21, 2021 #1 Looking to buy or rent a 6.5x47 Lapua reamer. Anyone have one they want to part with?
T tobnpr Well-Known Member Joined May 30, 2013 Messages 732 May 21, 2021 #2 For rental, 4D is an option (with a go gauge if needed)
Randy Tidwell Well-Known Member Joined Feb 14, 2019 Messages 520 Location OKC. OK. Escaped from CA in Dec 2019 May 21, 2021 #3 Where are they located.
MagMan Well-Known Member Joined Dec 20, 2002 Messages 1,582 Location Northern Michigan May 21, 2021 #4 Randy, I have one you could barrow. Only cut one chamber. I'm not home right now but I can give you a base to bearing measurement tomorrow.
Randy, I have one you could barrow. Only cut one chamber. I'm not home right now but I can give you a base to bearing measurement tomorrow.
KurtB Well-Known Member Joined Feb 11, 2004 Messages 795 Location Colorado May 22, 2021 #5 Mine has a .170 throat on it. Works great for 140 vld bullets. 2.80 oal to the lands approximately. Consider which bullets you plan on running.
Mine has a .170 throat on it. Works great for 140 vld bullets. 2.80 oal to the lands approximately. Consider which bullets you plan on running.
MagMan Well-Known Member Joined Dec 20, 2002 Messages 1,582 Location Northern Michigan May 22, 2021 #6 I shoot the 123 SMK's as well as the 142 SMK's to the same seating depth. Base to bearing is 2.104" so with a 142 SMK at the lands OAL would be 2.738"
I shoot the 123 SMK's as well as the 142 SMK's to the same seating depth. Base to bearing is 2.104" so with a 142 SMK at the lands OAL would be 2.738"