Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5-06 or 6.5-06 a-square
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Don A Parsons" data-source="post: 1756190" data-attributes="member: 97414"><p>Yes L. Sherman,,, I did the 30/06 Lapua brass,,, I thined the necks down to 13 thou,,, sized the brass down to 6.5,,, then did 2 fire forms...</p><p></p><p>The neck thining once again to 11 thou,,, anneal brass again to get a smoooooth neck tension...</p><p></p><p>Hornady made me some precision dies with 3 different size balls so I can adjust the neck tension... Floating collar in the die to help lesson neck run-out...</p><p></p><p>Remember to de-prime in first step,,, then set the ball high """up""" in the die to lesson """case neck run out."""</p><p></p><p>If a person gets the sizing die correctly set,,, you'll see less than 1 thou run-out,,, .5 is what I like to see...</p><p></p><p>This is my first ever Wildcat cartridge,,, so I spend a lot of time paying attention to details on the brass prep...</p><p></p><p>I'm going to test some 30/06 or 270 Nosler Brass this year,,, I heard it's a bit softer and I hope it cuts down on the Extrem Spread between the shots...</p><p></p><p>I won't know this till I give it a try...</p><p></p><p>Cheers from the North</p></blockquote><p></p>
[QUOTE="Don A Parsons, post: 1756190, member: 97414"] Yes L. Sherman,,, I did the 30/06 Lapua brass,,, I thined the necks down to 13 thou,,, sized the brass down to 6.5,,, then did 2 fire forms... The neck thining once again to 11 thou,,, anneal brass again to get a smoooooth neck tension... Hornady made me some precision dies with 3 different size balls so I can adjust the neck tension... Floating collar in the die to help lesson neck run-out... Remember to de-prime in first step,,, then set the ball high """up""" in the die to lesson """case neck run out.""" If a person gets the sizing die correctly set,,, you'll see less than 1 thou run-out,,, .5 is what I like to see... This is my first ever Wildcat cartridge,,, so I spend a lot of time paying attention to details on the brass prep... I'm going to test some 30/06 or 270 Nosler Brass this year,,, I heard it's a bit softer and I hope it cuts down on the Extrem Spread between the shots... I won't know this till I give it a try... Cheers from the North [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5-06 or 6.5-06 a-square
Top