375 ruger loads

houston

Well-Known Member
Joined
Dec 21, 2007
Messages
74
Howdy,

Been using R15 74 grains, 270gr TSX Great accuracy, but It gives me a sticky bolt all the way back to 69 grains the cases show good.
Shot a couple boxes of the new hornady 270 grain superformance and they chambered great and were as accurate, took one apart and there is 80 grains of a powder I wish I knew what it was. They are 125 fps quicker than the R15 load.
Read a load on H4350 and they show 78-83 grains and 100 fps slower, havn't tryed it personally.
It also appears that they will have to be crimped unless there is another trick, put three in the chamber shot a group and all 3 decreased in total length twice.
Going after a brownie in september, this is serious business :D
Thanks for any imput!
Jeff~
 
Try RL17

Here is a thread that has a lot of load data on it

375 ruger - 24hourcampfire

and my latest target

DSC00863.jpg



Start lower in your gun and work up like I did! My 375 Ruger has a 24" barrel and may be faster than yours.
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top