Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
338 lapua Build advice sav 110/stevens 200
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="mtthewj" data-source="post: 272312" data-attributes="member: 16733"><p>hi Guy's, </p><p>Looking for some advice on using a Std (Small shank) barrel and action for a .338 lapua, I recently purchased a Stevens 200 in 300 win mag after being told by savage That all magnum actions used the Large thread, after removing the barrel i realized that was not true ,as mine has a Small ahank thread. I have talked to a couple of barrel mfgs and they say they have built both types, I have checked presssure ratings on the lapua (61000) and the 300 win mag (64000) So my thinking is the lapua being slightly under the 300's rated pressure it should be ok . Any advice or insight greatly appreciatted.</p><p>One other thing, i have also asked to have a Rem 700 rebarreled in the .338 lapua (older 30-06) and have been told that is no problem for the 700 action , it too has a Similar size barrel thread 1.062 X 16TPI compared to the Savage 1.062x20TPI so if it's ok in a Remmie with similar size threads wouldnt it be ok in a savage?</p><p> </p><p>Thanks in advance</p><p> </p><p>Matt</p></blockquote><p></p>
[QUOTE="mtthewj, post: 272312, member: 16733"] hi Guy's, Looking for some advice on using a Std (Small shank) barrel and action for a .338 lapua, I recently purchased a Stevens 200 in 300 win mag after being told by savage That all magnum actions used the Large thread, after removing the barrel i realized that was not true ,as mine has a Small ahank thread. I have talked to a couple of barrel mfgs and they say they have built both types, I have checked presssure ratings on the lapua (61000) and the 300 win mag (64000) So my thinking is the lapua being slightly under the 300's rated pressure it should be ok . Any advice or insight greatly appreciatted. One other thing, i have also asked to have a Rem 700 rebarreled in the .338 lapua (older 30-06) and have been told that is no problem for the 700 action , it too has a Similar size barrel thread 1.062 X 16TPI compared to the Savage 1.062x20TPI so if it's ok in a Remmie with similar size threads wouldnt it be ok in a savage? Thanks in advance Matt [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
338 lapua Build advice sav 110/stevens 200
Top