300 winchester mag loads

[ann brezinski]

what are your favorite deer loads for long range work?
gary b

 

[WildRose]

Up until this year it was the 180gr Hornady Interbond and 80gr of H1000. Had the same excellent results with the 180gr accubond.

When I get time I'm going to try the same load with the Peregrine 180gr.

I picked up some factor Ammo as well to try which is the Hornady Precision 200gr ELD-X.

In all three of my 300wm's it shot very well so that will probably be the ammo/load I start the season with.

 

[FEENIX]

what are your favorite deer loads for long range work?
gary b

...

 

[BEEMAN]

Nosler brass, FED GM215M, H1000, with a 215 Berger. Can't beat it.

 

[lancetkenyon]

I am working up a load for a buddy right now that shows a lot of promise.

Nosler brass
CCI 250 Mag
H1000
Berger 210 HVLD

Got sub-half MOA with just a sight in load @ 200 yards & 2810fps, and an accuracy node in the 400 yard ladder test in the 2920-2975 fps range I will be working with.

 

[Red Delicious]

Hornady Brass
CCI 250
75.00 gr IMR 7828SSC
190 gr ABLR
3060 fps out of a Remington model 700 long range

 

[Browning300]

has anyone tried reloader 26 I'm working up a load with 215hybrids so far it shows promise 100fps better than h1000 in my rifle.

 

[Greyfox]

Nosler brass
Berger 210/215
Retumbo
Fed215
I also like H1000.but I get 75FPS higher velocity and better ES with Retumbo.

 

[JOSE A. MARINE]

federal brass
cci 250
208 A-MAX
78 grains of RETUMBO, that has proven safe in my rifle.

excellent accuracy, 1/2moa load out of a 26 inch sendero contour krieger barrel, its my goto load for 1000 meters..

JOE FROM MEXICO.

 

[FEENIX]

has anyone tried reloader 26 I'm working up a load with 215hybrids so far it shows promise 100fps better than h1000 in my rifle.

I did a custom query on the top right hand corner (as noted in #3) for "RL-26 .300 Win Mag" and got this >>> http://www.longrangehunting.com/forums/f116/over-2-000-yards-300-win-mag-157809/

 

[just country]

morning.
78.5grs. 4831SC
Winchester Brass
168gr. Barnes TTSX
Fed. 215m
stone cold killerlightbulbgun)

 

[johnnyk]

has anyone tried reloader 26 I'm working up a load with 215hybrids so far it shows promise 100fps better than h1000 in my rifle.

Yes, I'm running the 208gn ELD-M at 3096fps with .4" accuracy. SD: 7, ES: 13. Burning 74gn using CCI BR2's. I tried using several magnum primers but could not get the accuracy I wanted. JohnnyK.

 

[alaska]

IMR 4350 @ 75.0
180gr Nosler Part PP
CCI 250 primer
Nosler Brass

 

[Clark]

125 gr Nosler ballistic tip IMR-4166 3400 fps

I got a 3x3 mule buck running away at 250 yards in October 2015.

He stood in his hind legs and fell over.

The 4166 is temp compensated and anti Copper fouling. I don't know how well the Copper coating works as I had a new Krieger barrel. It seemed to resist Copper the best I have seen at that velocity, but it could just be the barrel.