Double Dropper
Well-Known Member
Scored a couple of pounds of the desired powder, been waiting a while so started the loads today. Played back and forth with Remington Brass and ADG brass. Loading pressure for either was pretty close to the same. Both brass were sorted, and finalized with bushing dies, ADG were/are very consistent. CCI 250 in the ADG and Fed 215GM in the Remington. Definitely started lower with the new batch and worked my way up, Custom 26" barrel and max COAL due to the mag box is about 3.514. Started with 180 grain Accubonds, 190 grain Bergers, 190 grain Accubond LR's, 200 grain ELDX and Accubonds. Loaded up some 212 ELDX in the Remmys but did not shoot these. The most accurate bullet in the bunch.......not what I expected but the 180 grain Accubonds??? Didnt push real hard and stopped at 78.5 grains, primers were very flat and slight extractor mark on the base, rolled it back to 77.5 and loaded up 20 more. Easy loading with RL-26 and it seems more consistent than H1000 and RL-25.