300 Win Mag 200 Grain Hybrid

I was shooting three shot groups. I tried a few loads of 7828ssc and h1000 at various seating depths. I guess i figured I got lucky the first time with my old 300. I'm deffentlly open to suggestions
 
I was shooting three shot groups. I tried a few loads of 7828ssc and h1000 at various seating depths. I guess i figured I got lucky the first time with my old 300. I'm deffentlly open to suggestions
Start at .015 OFF THE LANDS. Then WORK BACK INTO THE CARTRIDGE CASE IN .005 INCREMENTS. effects of bullet seating depth can be found here: http://www.bergerbullets.com/effect...coal-and-cartridge-base-to-ogive-cbto-part-1/

http://www.bergerbullets.com/effect...coal-and-cartridge-base-to-ogive-cbto-part-2/
Any bullet seating depthtesting should be done at the lowest powder charge listed for the bullet/powder/cartridge combination you are testing. Once the bullet seating depth accuracy node is found. Work rthe powder charge back up slowly checking for pressure signs and accuracy until your highest velocity accuracy node is found.
Let me know what you find and if you have any more questions. Thanks for using our bullets !!
 
Warning! This thread is more than 7 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top