Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
30-06 compressed loads
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Tripodmvr7" data-source="post: 1997426" data-attributes="member: 115545"><p>Quick Load also shows over full case. I try to limit compressed loads to 105% as higher percentage starts giving extrusion of bullets. I used a COL that ensures enough contact between bullet shank and case neck for proper neck tension and alignment. I used a 24 inch barrel and have calculated to Node 4.</p><p></p><p>This calculation indicates that a faster propellant will be better, that is why I used CFE223 and found a good match. Same pressure, 95% case fill and speed up to 3010fps at Node 4.</p></blockquote><p></p>
[QUOTE="Tripodmvr7, post: 1997426, member: 115545"] Quick Load also shows over full case. I try to limit compressed loads to 105% as higher percentage starts giving extrusion of bullets. I used a COL that ensures enough contact between bullet shank and case neck for proper neck tension and alignment. I used a 24 inch barrel and have calculated to Node 4. This calculation indicates that a faster propellant will be better, that is why I used CFE223 and found a good match. Same pressure, 95% case fill and speed up to 3010fps at Node 4. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
30-06 compressed loads
Top