The Oregonian
Well-Known Member
Have three new rifles this year and my time and practice was spent on the other two due to hunts where I needed those rifles. Just turning my attn to the 280ai, though I have done some small load development sessions and nothing jumped out at me, so I shelved it until I had time for it.
Well, now I have time for it.
Right now I have H1000, N560, and H4350. A load was sent with the rifle using H1000 but it is around 2800 FPS and I should be able to easily get 100-150 FPS more out of it.
This is going in a 25" 8 twist barreled custom and I can seat the bullets out as far as I like.
Anyone point me in the right direction? I will work up to any and all loads, just looking to see what people are getting velocity wise with various powders, and how much powder it takes to get there.
Well, now I have time for it.
Right now I have H1000, N560, and H4350. A load was sent with the rifle using H1000 but it is around 2800 FPS and I should be able to easily get 100-150 FPS more out of it.
This is going in a 25" 8 twist barreled custom and I can seat the bullets out as far as I like.
Anyone point me in the right direction? I will work up to any and all loads, just looking to see what people are getting velocity wise with various powders, and how much powder it takes to get there.