264 Win Mag Build

Discussion in 'Gunsmithing' started by MHO, Feb 23, 2012.

  1. MHO

    MHO Well-Known Member

    Messages:
    600
    Joined:
    Dec 28, 2010
    Looking for a gunsmith recommendations that you have personally used. Thanks for any input.
     
  2. ICANHITHIMMAN

    ICANHITHIMMAN Well-Known Member

    Messages:
    4,380
    Joined:
    Jan 31, 2008
    Kevin Cram or Kirby Allen
     

  3. MHO

    MHO Well-Known Member

    Messages:
    600
    Joined:
    Dec 28, 2010
    ICANHITHIMMAN thank you.
     
  4. Tom264

    Tom264 Well-Known Member

    Messages:
    145
    Joined:
    May 14, 2009
    Dont know if it's too late or not but you can always try Kampfeld customs.
    He built my .264wm
     
  5. MHO

    MHO Well-Known Member

    Messages:
    600
    Joined:
    Dec 28, 2010
    Tom,
    Thanks, I will take a look.
     
  6. Tom264

    Tom264 Well-Known Member

    Messages:
    145
    Joined:
    May 14, 2009
    No problem, good luck.
     
  7. WesB

    WesB Well-Known Member

    Messages:
    102
    Joined:
    Feb 3, 2008
    Chad Dixon. He built my 7 mm mag and another for a friend. Both are tack drivers. The craftsmanship is beyond compare.
    LongRifles, Inc.
    Wes
     
  8. MHO

    MHO Well-Known Member

    Messages:
    600
    Joined:
    Dec 28, 2010
    Wesb and everyone. Thanks form all your input. I will check them out.
     
  9. Outlaw6.0

    Outlaw6.0 Well-Known Member

    Messages:
    3,007
    Joined:
    Feb 18, 2010

    ^^+1 here, Chad worked over my 6-284 (below) & is as we speak, doing a full blown 6.5WSM for me... No BS, straight forward relationship. My experience has been fantastic.
     

    Attached Files: