Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
260 Rem pet loads
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Clark" data-source="post: 311002" data-attributes="member: 6600"><p>VZ24 action</p><p>260 Rem, 22" Douglas long chambered barrel</p><p> VZ24 stock with barrel channel milled out but no epoxy</p><p> Weaver #45 and #46 two piece steel scope mounts with Devcon Steel putty</p><p>under the mounts and Loctite 242 on the threads. Burris Low tactical</p><p>rings with 6 screws on the cap and a bolt on the Weaver rail.</p><p>IOR 2.5x10x42 scope with MP-8 1/2 mili rad reticule in first focal plane</p><p>and moa turrets. Rubber tube extensions on both ends of the scope. Scope</p><p>center is 1.9" above bore center.</p><p>100 gr Nosler Ballistic Tip moly coated # 26100 bullet moly coated ,</p><p>45.0 gr canister IMR4895,</p><p>2.940" over all length, almost no insertion of the bullet into the neck,</p><p>due to the short bullet and long throat.</p><p>Quickload prediction 61,328 psi 3261 fps</p><p>chronographs as 3,236 fps</p></blockquote><p></p>
[QUOTE="Clark, post: 311002, member: 6600"] VZ24 action 260 Rem, 22" Douglas long chambered barrel VZ24 stock with barrel channel milled out but no epoxy Weaver #45 and #46 two piece steel scope mounts with Devcon Steel putty under the mounts and Loctite 242 on the threads. Burris Low tactical rings with 6 screws on the cap and a bolt on the Weaver rail. IOR 2.5x10x42 scope with MP-8 1/2 mili rad reticule in first focal plane and moa turrets. Rubber tube extensions on both ends of the scope. Scope center is 1.9" above bore center. 100 gr Nosler Ballistic Tip moly coated # 26100 bullet moly coated , 45.0 gr canister IMR4895, 2.940" over all length, almost no insertion of the bullet into the neck, due to the short bullet and long throat. Quickload prediction 61,328 psi 3261 fps chronographs as 3,236 fps [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
260 Rem pet loads
Top