22 Hornet Brass and Stuff

Discussion in 'Reloading Equipment and Components' started by mleeber, Oct 11, 2013.

Thread Status:
Not open for further replies.
  1. mleeber

    mleeber Member

    Messages:
    22
    Joined:
    Mar 28, 2011
    Sold the Hornet and still have some stuff left....
    Brass:
    331 New pieces of brass (3 sealed bags of 100 plus 31 loose)
    48 Once fired pieces but cleaned inside and out.

    Bullets:
    32 Hornady "Hornet" 45gr bullets.

    Dies:
    Lee Deluxe set with full length sizing die, neck sizing die, bullet seating die and I added a factory crimp die. Used to load less than 200 rounds.

    Factory Loaded Ammo:
    Hornady #8032 22 Hornet 35gr VMax one full box of 25 plus one partial box of 12.

    Plus I have the following loaded rounds that you can pull for components:
    5 loaded with 10.5gr 4227 under 35gr Hornady VMax 1.754 OAL CCI450
    5 loaded with 11.0gr 4227 under 35gr Hornady VMax 1.754 OAL CCI450
    5 loaded with 10.0gr 4227 under 45gr Hornady 1.859 OAL CCI450
    5 loaded with 10.5gr 4227 under 45gr Hornady 1.859 OAL CCI450
    5 loaded with 12.7gr Lil Gun under 35gr Hornady VMax 1.754 OAL CCI450
    66 loaded with 13.0gr Lil Gun under 35gr Hornady VMax 1.754 OAL CCI500
    44 loaded with 13.0gr Lil Gun under 45gr Hornady 1.859 OAL CCI500

    The 5 each were for comparison when developing a load for my TC.

    The other 66 and 44 were the light and heavy loads I settled on.

    Buyer must agree that they are buying the reloaded rounds to take apart for the components.

    $220 shipped CONUS (FedEx ground since there is ammo). USPS, Wells Fargo or Regions Bank Money order.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. mleeber

    mleeber Member

    Messages:
    22
    Joined:
    Mar 28, 2011
    SPF. Thanks!!!
     

Thread Status:
Not open for further replies.