Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
210 Bergers in 300WinMag
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="brentc" data-source="post: 915058" data-attributes="member: 16938"><p>I've found good Retumbo loads with 215s and 230s, but never 210s. My 215 load is 77.5 at Mag length OAL running 2920 fps. The ES wasn't great though, and I switched to H4831SC at 50 fps for single digit ES and about 50 fps less velocity. I'd be comfortable running the Retumbo load in a pinch though. I think your load will end up right around 78-79 grains depending on your brass. You can also try some 7828 if you have it. Start at .010 or closer to the lands with the VLD, find your powder charge, then work your seating depth. You may not need to adjust the depth. The VLDs will show you where they want to shoot.</p><p></p><p>Greyfox on here running the 210s over 79 grains of Retumbo with a Fed 215 in Norma brass in a Rem 700 5r I believe he is .010 off the lands. He may chime in here.</p></blockquote><p></p>
[QUOTE="brentc, post: 915058, member: 16938"] I've found good Retumbo loads with 215s and 230s, but never 210s. My 215 load is 77.5 at Mag length OAL running 2920 fps. The ES wasn't great though, and I switched to H4831SC at 50 fps for single digit ES and about 50 fps less velocity. I'd be comfortable running the Retumbo load in a pinch though. I think your load will end up right around 78-79 grains depending on your brass. You can also try some 7828 if you have it. Start at .010 or closer to the lands with the VLD, find your powder charge, then work your seating depth. You may not need to adjust the depth. The VLDs will show you where they want to shoot. Greyfox on here running the 210s over 79 grains of Retumbo with a Fed 215 in Norma brass in a Rem 700 5r I believe he is .010 off the lands. He may chime in here. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
210 Bergers in 300WinMag
Top