Canhunter35
Well-Known Member
- Joined
- Jun 13, 2017
- Messages
- 3,166
Went with a bc of .259 at 2678fps out of my 308 with the eldm. Was a little low, going to adjust my velocity down to 2670fps. That would put me right in the center of the gong.
On a side note, I haven't had the tightest es with this brass. About 30es, but I reamed the flash holes finding a few that were too small. I think the proof is on the target of how that affects the es. This is a mix of federal and Remington brass tossed together. They've had primer pockets levelled, and annealed after the 3rd firing and this is the sixth firing. I'll anneal them again