Recent content by eric nelson

Typo of by 10

Use either (starting fluid)

Steve don’t tell them how much walnut oil you are infusing into the new vapor trailing bullets. I have to say, cheap entertainment🤣

Hot mag primers are (to me) very important in your case. Possibly try a different pack?

Flexible soft freeze packs in the extra large size are like a 12”x12” blanket. Two of these will wrap the barrel with a couple large rubber bands or Velcro. Preferably o shoot 3 guns. One is being fired. One is chilling and the next one to be fired is resting without chill wraps to stabilize...

I have read this forum for years. Never posted nor navigated through for specific questions. I find it difficult to locate specific info. I did go to Hammer website and got some info. If there is a easy way please advise. I have 3 gun safes full and have reloaded for 50 years. I help all the...

Looking for suggested loads for standard Winchester .270 in model 70 with 24" Shooting Hammer Hunters 117 grain. If you have info for 7MM Rem Mag. with Hammer Hunters a 131 grain. shooting a 24" Ruger. I would appreciate that also

Thanks I had the Epstein #’s but not the Ruger. It appears as though the bolt face won’t work? Any suggestions here?

I purchased a never fired in the white Sako L 61 R A 5 Chambered in 375 Epstein. I would like to know if rechambering to a Ruger 375 is possible

I sent an e mail to LAPUA last night and this morning their Rep. Kevin Thomas sent me an e mail explaining that without seeing a good photo he was not sure how serious the issue was. And that his experience was the flash hole bur typically does not effect the accuracy. At any rate I will send...

I purchased new LAPUA brand Lapua 338 mag brass. Out of 100, 61 had flash hole machine burs remaining in the hole. Very poor quality! My first purchase after reading extensively about how good the $ 2.70 per cases were. Any experiences like mine. The lot is P00580202 purchased through Midway...

Thanks Jeff for your help. I assume " Custom " designates a three die set? and they come with bushings? how many? The gentleman with the dies please e me with contact info. [email protected] Thanks Eric

This will be new to me. I have a RCBS Rock Chuck press and have used it for many years. Never with bushing type dies. Wondering what you would suggest; manufacturing company and type of dies and why. I will be using an 8 lb. rifle and long range hunting and long range shooting. So far I only can...

1. still for sale ? 2. dies ? 3. Case ? 4 interested in Northern CA.

first message, short time member. Walnut farming near Marysville, CA. Two projects ongoing. new barrel for TC Encore, thinking .280 AI / 26" / 1 in 9 / SS /