cbuck516's latest activity

just using all default values and profiles, the 69.0gr RL22 load produced 68.5kpsi. That doesn't necessarily mean that's exactly the...

Comparing those two powders in GRT with the information you provided, it looks like you should be able to get a little more velocity out...

Well I was able to play this morning and took the 338 Allen Magnum out to see what it would do with some 275gr SBD2s. Here's what I...

375 EnABELR Peterson Case CCI #34 primer 24N41 - 135grains 365 grain SBD2 Got the 365 SBD2 pushing an average of 2975fps. Really need...

I ran a GRT simulation for a 26" 6.5CM and there is roughly a 20FPS gain in max velocity for Staball HD over Staball 6.5. Also, powder...

At those dimensions, does that actually keep the bearing surface of the 150gr out of the neck/shoulder junction? Just by eyeballing the...

So I was able to take some chamber measurements in the new 270WSM-LA I had built with the 150 SBD-2 and also the 140 SBD-2. See photos...

136gn of 24N41 is pushing the 365 SBD-2 an average of 2978 fps. 375 EnABELR 30” 1:8 twist, 6 groove K and P

Is that an extra 0.040" freebore beyond a saami chamber? I was hoping to do a 1:7" 270WSM with a saami chamber. I will be curious where...

Done. Range time will be in 2 weeks. Just got this finished up yesterday.

I need to try a faster powder with the 365’s. 24N41 fills it up pretty good, and I have to seat the bullets pretty far into the case to...

Seeing the speeds I was looking for with the 275 SBD-2 in my 338NM. Not sure how much of a difference it really makes, but this is a...

I started reading with the first post and after 5 pages I thought “enough of this, I’ll go to the last page.” Huh, not much improvement...