Well I did a ladder test and made it to 59.0grns @ 3216fps. 59.5 I had heavy bolt lift and ejector marks on the case head. This is with 4831SC loaded to 2.320CBTO.
Badlands BD-2 load data
- Thread starter sbruni
- Start date
Help Support Long Range Hunting Forum
Well….it was -1° when I got to the range. Needless to say I didn't shoot all the rounds I had brought.
375 EnABELR
30" K and P 1:8 twist barrel
390 grain Super Bulldozer-2
Powder: Retumbo
Primer: REM 9 1/2M
Cartridge: Virgin Peterson
No signs of pressure on any of the loads. Not sure how fast I'll try and push it. I was shooting for 2850 with the 125gn's and exceeded that.
On a side note, my scope is bottomed out and still shooting a foot low at 300 yards. I have a 60 MOA rail on it now, might have to throw the 40 MOA rail on.
Charge - Speed
120gn - 2817
120gn - 2792
120gn - 2796
120gn - 2825
123gn - 2904
124gn - 2902
125.5gn - 2948
375 EnABELR
30" K and P 1:8 twist barrel
390 grain Super Bulldozer-2
Powder: Retumbo
Primer: REM 9 1/2M
Cartridge: Virgin Peterson
No signs of pressure on any of the loads. Not sure how fast I'll try and push it. I was shooting for 2850 with the 125gn's and exceeded that.
On a side note, my scope is bottomed out and still shooting a foot low at 300 yards. I have a 60 MOA rail on it now, might have to throw the 40 MOA rail on.
Charge - Speed
120gn - 2817
120gn - 2792
120gn - 2796
120gn - 2825
123gn - 2904
124gn - 2902
125.5gn - 2948
Last edited:
ClydeG
Active Member
Loading 175gr SB-2 in 300wm Bergara B14 1:10 twist 24" Barrel.
I have: H4350,H1000, Retumbo, Varget, 4831SC Does anyone have any experience with similar combo?
A Little background, trying to find a load for a friend and he wanted Barnes TTSX or Berger(sorry NRAlifer), had good not great SD'S and ES but couldn't get it to group better than 1.25 MOA, did powder and seating ladders for both bullets with H1000 and 4831SC. Thinking about trying both powder charges with the SB2's. Thoughts?
Lapua Brass
Federal 215 LRM
I have: H4350,H1000, Retumbo, Varget, 4831SC Does anyone have any experience with similar combo?
A Little background, trying to find a load for a friend and he wanted Barnes TTSX or Berger(sorry NRAlifer), had good not great SD'S and ES but couldn't get it to group better than 1.25 MOA, did powder and seating ladders for both bullets with H1000 and 4831SC. Thinking about trying both powder charges with the SB2's. Thoughts?
Lapua Brass
Federal 215 LRM
Last edited:
I've run the 195's in my 300WM and 300PRC. I'll have to dig through my data. Badlands will pressure up faster than the Barnes of similar weight.
I ran H1000 in my 300WM and found a really good load with N570 in my PRC.
FireFlyFishing
Well-Known Member
Also, glad this thread resurfaced. I'm loath to look at every page of the thread. Anyone try the 136grn .308 in a 308 win?
I've been reworking my 338NM load with the 275's since I put a new barrel on. Trying to get it a little faster. Going to have to try a new powder. It seems the faster I'm getting the bigger the groups are getting. Not acceptable. Going to pull the barrel off and check my COAL again touching the lands.
Speeds chrono'ed with a Garmin Xero C1.
338 NM - 26" - 1:8 twist - 6 groove K and P barrel
Case: Peterson - Fired
Powder: H1000
Bullet: 275gn SBD-2
Primer: CCI# 34
Charge-Speeds (three shots each charge
89.3 - 2837 / 2814 / 2800
89.6 - 2793 / 2829 / 2832
89.9 - 2802 / 2828 / 2845
90.2 - 2829 / 2828 / 2835
90.5 - 2841 / 2843 / 2843
————————————————————
375 EnABELR - 30" - 1:8 twist - 6 groove K and P
Case: Peterson Virgin
Powder: Retumbo and VV 24N41
Bullet: 390gn SBD-2
Charge - Speed (Six shots per charge)
Retumbo
124.2gn - 2949/ 2930/ 2928/ 2949/ 2923/ 2927
VV24N41
132.16gn - 2814/ 2809/ 2812/ 2830/ 2827/ 2837
Speeds chrono'ed with a Garmin Xero C1.
338 NM - 26" - 1:8 twist - 6 groove K and P barrel
Case: Peterson - Fired
Powder: H1000
Bullet: 275gn SBD-2
Primer: CCI# 34
Charge-Speeds (three shots each charge
89.3 - 2837 / 2814 / 2800
89.6 - 2793 / 2829 / 2832
89.9 - 2802 / 2828 / 2845
90.2 - 2829 / 2828 / 2835
90.5 - 2841 / 2843 / 2843
————————————————————
375 EnABELR - 30" - 1:8 twist - 6 groove K and P
Case: Peterson Virgin
Powder: Retumbo and VV 24N41
Bullet: 390gn SBD-2
Charge - Speed (Six shots per charge)
Retumbo
124.2gn - 2949/ 2930/ 2928/ 2949/ 2923/ 2927
VV24N41
132.16gn - 2814/ 2809/ 2812/ 2830/ 2827/ 2837
ClydeG
Active Member
30 Nosler
84.86 Gr of 4831sc
Federal 215 LRM
ADG Brass
Neck Tension .0025
SD 7.6
ES 16
Avg 3133 FPS
.5 MOA at .020 of lands Seating ladder upcoming.
24" Proof Carbon barrel 1:9 twist.
84.86 Gr of 4831sc
Federal 215 LRM
ADG Brass
Neck Tension .0025
SD 7.6
ES 16
Avg 3133 FPS
.5 MOA at .020 of lands Seating ladder upcoming.
24" Proof Carbon barrel 1:9 twist.
You shooting the 195's? Thinking about a fast twist 30 cal to shoot the 205's.
ClydeG
Active Member
Yes Sir 195's
Seeing the speeds I was looking for with the 275 SBD-2 in my 338NM.
Not sure how much of a difference it really makes, but this is a CIP cut chamber.
Case: Peterson Fired
Barrel: 26" 1:8 K & P - 6 groove
Powder: H1000
Primer: CCI #34
Bullet: 275 SBD-2 - Seated at mag length. 2.760" to OGIVE. Roughly .100" of jump.
Charge - Speed (3 shots per charge)
90.5 - 2869, 2858, 2884
90.8 - 2874, 2871, 2875
91.1 - 2878, 2870, 2875
Not sure how much of a difference it really makes, but this is a CIP cut chamber.
Case: Peterson Fired
Barrel: 26" 1:8 K & P - 6 groove
Powder: H1000
Primer: CCI #34
Bullet: 275 SBD-2 - Seated at mag length. 2.760" to OGIVE. Roughly .100" of jump.
Charge - Speed (3 shots per charge)
90.5 - 2869, 2858, 2884
90.8 - 2874, 2871, 2875
91.1 - 2878, 2870, 2875
I need to try a faster powder with the 365's. 24N41 fills it up pretty good, and I have to seat the bullets pretty far into the case to be just off the lands.
375 EnABELR
Case: Virgin Peterson
30" 1:8 twist - 6 groove K and P
365 and 390 grain Super Bulldozer-2
Powder: 24N41
Primer: CCI#34
365 SBD2: Charge/ Speed (three shots per charge)
136.5 - 2968, 2989, 2995
136.8 - 2989, 2979, 2989
137.1 - 2966, 2988, 2981
390 SBD2
2.900" to Ogive 132.2 - 2850, 2876, 2877
2.897" to Ogive 132.2 - 2855, 2874, 2876
Going to drop down to 90.35gn of H1000 and see if I can get the groups to tighten back up like they were at a lower speed.
338 NM - 26" - 1:8 twist - 6 groove K and P
Case: Peterson - Fired
Powder: H1000
Bullet: 275gn SBD-2
Primer: CCI# 34
90.95gn of H1000
2.751" to Ogive - 2876, 2875, 2871
2.748" to Ogive - 2874, 2867, 2867
375 EnABELR
Case: Virgin Peterson
30" 1:8 twist - 6 groove K and P
365 and 390 grain Super Bulldozer-2
Powder: 24N41
Primer: CCI#34
365 SBD2: Charge/ Speed (three shots per charge)
136.5 - 2968, 2989, 2995
136.8 - 2989, 2979, 2989
137.1 - 2966, 2988, 2981
390 SBD2
2.900" to Ogive 132.2 - 2850, 2876, 2877
2.897" to Ogive 132.2 - 2855, 2874, 2876
Going to drop down to 90.35gn of H1000 and see if I can get the groups to tighten back up like they were at a lower speed.
338 NM - 26" - 1:8 twist - 6 groove K and P
Case: Peterson - Fired
Powder: H1000
Bullet: 275gn SBD-2
Primer: CCI# 34
90.95gn of H1000
2.751" to Ogive - 2876, 2875, 2871
2.748" to Ogive - 2874, 2867, 2867
Bghunter338
Well-Known Member
Are you going to shoot the 150s?
