Feelluckypunk
Member
- Joined
- Sep 22, 2012
- Messages
- 17
Selling my custom built by RW Snyder bolt-action 300WM rifle. 700 LA, trigger and barrel mated by RW Snyder Gunsmithing. Selling entire package with or without the scope or rings.
Here's the details on the rifle:
-The receiver and bolt is a Remington 700 Long action that has been blueprinted and trued.
-Custom Tactical bolt knob.
-The Barrel is a Shillen Precision 24" Select Match Grade 1:10 twist Full Bull Stainless threaded barrel.
-The Muzzle brake is a custom stainless, multi-ported VIAS Muzzle Brake. No felt recoil on this 300WM.
-The Trigger is a Kepplinger set-trigger which if you push it forward it sets the trigger to 8oz of pull, or un-set for a nice crisp 3 lb pull on the trigger.
-The chassis is a Accuracy International 2.0 OD folding, fully adjustable chassis systems specifically made for the Remington 700 LA.
-Two 5 round 300WM magazine.
-The Rail for the scope is a LaRue Tactical LA rail 20 MOA.
-Pelican all weather rifle case.
-Atlas Bipod, spigot and monopod.
- 200 pieces if new RWS brass and 200-250 Berger 210gr. VLD's
- Can include Nightforce 8-32x56 NPR1 cerakoted matching OD green for additional $1600 with a set of nightforce ultralight rings.(will only sell scope after rifle is gone)
The rifle is a consistent 1/2 MOA shooter and performed flawlessly out to 1000yds with multiple back to back hits on 8" and 10" steel. Total round count is 365-385(I may have lost track of 20, so I'll add them in). As far as condition, theres not a scratch on it as its only been shot of a bench. Cost of package $3,200 without scope and $4,800 with. Can ship FFL to FFL for $50 on your side and I'll cover the rest. If buyer is local can also add approximately 100 factory loaded rounds, assorted. Located in Dade County, Florida but can drive to meet you a couple of hours.
Dan Z
786-314-6276
Here's the details on the rifle:
-The receiver and bolt is a Remington 700 Long action that has been blueprinted and trued.
-Custom Tactical bolt knob.
-The Barrel is a Shillen Precision 24" Select Match Grade 1:10 twist Full Bull Stainless threaded barrel.
-The Muzzle brake is a custom stainless, multi-ported VIAS Muzzle Brake. No felt recoil on this 300WM.
-The Trigger is a Kepplinger set-trigger which if you push it forward it sets the trigger to 8oz of pull, or un-set for a nice crisp 3 lb pull on the trigger.
-The chassis is a Accuracy International 2.0 OD folding, fully adjustable chassis systems specifically made for the Remington 700 LA.
-Two 5 round 300WM magazine.
-The Rail for the scope is a LaRue Tactical LA rail 20 MOA.
-Pelican all weather rifle case.
-Atlas Bipod, spigot and monopod.
- 200 pieces if new RWS brass and 200-250 Berger 210gr. VLD's
- Can include Nightforce 8-32x56 NPR1 cerakoted matching OD green for additional $1600 with a set of nightforce ultralight rings.(will only sell scope after rifle is gone)
The rifle is a consistent 1/2 MOA shooter and performed flawlessly out to 1000yds with multiple back to back hits on 8" and 10" steel. Total round count is 365-385(I may have lost track of 20, so I'll add them in). As far as condition, theres not a scratch on it as its only been shot of a bench. Cost of package $3,200 without scope and $4,800 with. Can ship FFL to FFL for $50 on your side and I'll cover the rest. If buyer is local can also add approximately 100 factory loaded rounds, assorted. Located in Dade County, Florida but can drive to meet you a couple of hours.
Dan Z
786-314-6276
Last edited:
