SOLD/EXPIRED WTS Full Custom Built 6.5 Creedmoor

jarodjohns

Well-Known Member
Joined
Feb 12, 2013
Messages
871
Location
Colorado
WTS Custom Built 6.5 Creedmoor built by Overholser Precision in El Reno, OK.

Specs:
Remington 700 Short Action - Fully Blueprinted - $450 action - $300 blueprint
Benchmark Barrel 1:8 twist Heavy Palma contour finished at 23" - $350 barrel - $300 chamber - $175 thread and install brake
APA Fat Bastard Gen 2 muzzle brake - $185
Jewell HVR Trigger - $225
AICS Chassis with factory green skins and FDE Viper Skins - $1025 chassis - $150 Viper skins
Badger Ordnance 20 MOA rail - $150 rail
Atlas bipod with AICS mount - $275 bipod - $75 mount
CTK rear monopod - $150
Fresh matte black cerakote by Firearm's Solutions in Duncan, OK. - $200

I purchased this rifle used from the original owner in a FTF transaction locally but did not know him personally. He said he had roughly 250-300 rounds down the barrel. When I got it from him the it was tan cerakote but when in the gunsmiths barrel vice it slipped and had marks in the cerakote. Last week I had Firearms Solutions bead blast the tan off and bake matte black on it. I've shot it approximately 35 - 40 times with some loaded ammo that the seller provided and it put 3 shots at 225 yards that half a dime would cover. Asking $3400 shipped and insured for everything listed above.

I can provide additional pictures upon request.
 

Attachments

  • IMG_2364 copy.jpg
    IMG_2364 copy.jpg
    42.7 KB · Views: 3
  • IMG_2365 copy.jpg
    IMG_2365 copy.jpg
    44.8 KB · Views: 2
  • IMG_2366 copy.jpg
    IMG_2366 copy.jpg
    44.4 KB · Views: 2
  • IMG_2367 copy.jpg
    IMG_2367 copy.jpg
    44.1 KB · Views: 3
  • unnamed.jpg
    unnamed.jpg
    47.3 KB · Views: 2

jarodjohns

Well-Known Member
Joined
Feb 12, 2013
Messages
871
Location
Colorado
Will add the 4.5-27x56 Vortex Razor GenII with NF extreme rings, defender caps, level and throw lever I have listed to this package for $5200 shipped insured. That is over $1900 off the cost of new for a range ready proven tack driver with top quality components and no expenses spared.
 

jarodjohns

Well-Known Member
Joined
Feb 12, 2013
Messages
871
Location
Colorado
Jarod post us some better pics. Weight? What bullet, load, velocity, dies?

Weighs about 14.5 lbs on bathroom scale no scope or rings. All I shot through it was some 140 Berger Hybrids over 40 gr of Hodgdon 100V that were provided when I purchased it. The guy I bought from said about 2750-2800 fps but I did not chrono it. No dies included as I have a couple of 6.5 CM's.
 

Attachments

  • IMG_2395.jpg
    IMG_2395.jpg
    50.9 KB · Views: 4
  • IMG_2394.jpg
    IMG_2394.jpg
    51.1 KB · Views: 3
  • IMG_2393.jpg
    IMG_2393.jpg
    48.3 KB · Views: 3
  • IMG_2392.jpg
    IMG_2392.jpg
    43.9 KB · Views: 3
  • IMG_2396.jpg
    IMG_2396.jpg
    45.4 KB · Views: 3
Top