D
Deleted member 17899
Guest
I had Greg build a 30/338 Lapua. The Specs are as follows
Riflesmith GRE-TAN
30" Krieger barrel with Vias MB, 1-12 twist , TRG-42 contour
Action threads were single point cut, Bushed firing pin , Action face trued and squared , etc
Custom dies included
All metal work was then KG coated
The Rifle is extremely accurate with 190gr Bergers (Few groups shown)
.200 or less @ 100 yards
1 inch or less @ 500 yards
Around 5 inches @ 1100 yards
Rifle has been fired 53 times
I would like to get $3000 , Scope,rings,bi-pod not included
I am open to trades/cash on High end optics
Riflesmith GRE-TAN
30" Krieger barrel with Vias MB, 1-12 twist , TRG-42 contour
Action threads were single point cut, Bushed firing pin , Action face trued and squared , etc
Custom dies included
All metal work was then KG coated
The Rifle is extremely accurate with 190gr Bergers (Few groups shown)
.200 or less @ 100 yards
1 inch or less @ 500 yards
Around 5 inches @ 1100 yards
Rifle has been fired 53 times
I would like to get $3000 , Scope,rings,bi-pod not included
I am open to trades/cash on High end optics
