Sheephunter208
Well-Known Member
Looking for a custom 7mm possibly 7 mag mostly a long range deer gun and occasional elk nothing over 800. Already have a night force so not looking for a scope but if it's the right deal. Thanks
-
You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.
We offer multiple options to become a Supporting Member here.
SOLD/EXPIRED Wtb 7mm
- Thread starter Sheephunter208
- Start date
Help Support Long Range Hunting Forum
I have this 7mm I was considering selling.
SS Rem 700 trued
Hart 26" SS fluted barrel I think it is a #5
HS stock
Timney trigger
EGW 20 MOA base
TPS rings
Huskemaw 5-20-50 scope with 2 turrets for 168 VLD's at 3076FPS...1 at 5000FT and 1 for 9000FT
Shoots both 168 and 180 VLD's under .5 MOA
Was asking $3200 shipped
SS Rem 700 trued
Hart 26" SS fluted barrel I think it is a #5
HS stock
Timney trigger
EGW 20 MOA base
TPS rings
Huskemaw 5-20-50 scope with 2 turrets for 168 VLD's at 3076FPS...1 at 5000FT and 1 for 9000FT
Shoots both 168 and 180 VLD's under .5 MOA
Was asking $3200 shipped
Attachments
leifalweapon
Member
- Joined
- Nov 11, 2013
- Messages
- 20
how much does it weigh? is it a 7mm rem mag? Do you have the hand load recipe worked up for long range? is it accurate out to a thousand?
hmbleservant
Well-Known Member
- Joined
- Nov 14, 2010
- Messages
- 156
http://www.longrangehunting.com/for...m-mag-like-new-never-used-156760/#post1101406
I just listed this minutes ago in the forum. Let me know if you are interested.
I bought two of these at the same time for the same purpose as you described. One for my buddy who never did anything with it. That's why I am selling it. I love mine, and I am working with it now. Call me if you want to chat.
Also, keep in mind if you want to build a custom rifle over time. This is considered by many/most to be the rifle of choice for a base custom rifle. This is what I am doing. But it gets you to ~800 yards or less immediately depending on if it needs a recoil lug bedding job ($100.00) My first load prior to any ladder work is already shooting 7 shots well under an inch @ 100 yds. I have no doubt it will get me to about 1/2-3/4 moa with just a little load development. Of course, over time, new barrel ($350) and maybe a some action work ($200). Now you have a guaranteed sub 1/2 moa rifle with endless aftermarket options.
Anyway, let me know if you are interested. Don't compromise. Get what you want. Good luck!
I just listed this minutes ago in the forum. Let me know if you are interested.
I bought two of these at the same time for the same purpose as you described. One for my buddy who never did anything with it. That's why I am selling it. I love mine, and I am working with it now. Call me if you want to chat.
Also, keep in mind if you want to build a custom rifle over time. This is considered by many/most to be the rifle of choice for a base custom rifle. This is what I am doing. But it gets you to ~800 yards or less immediately depending on if it needs a recoil lug bedding job ($100.00) My first load prior to any ladder work is already shooting 7 shots well under an inch @ 100 yds. I have no doubt it will get me to about 1/2-3/4 moa with just a little load development. Of course, over time, new barrel ($350) and maybe a some action work ($200). Now you have a guaranteed sub 1/2 moa rifle with endless aftermarket options.
Anyway, let me know if you are interested. Don't compromise. Get what you want. Good luck!
It is a Rem 7mm...As is in picture it weighs @11 pounds according to the bathroom scale. I will provide load data for both loads to buyer and it is proven accurate to 1000 yards. Both turrets are marked to 1000. I have taken a couple antelope at over 800 yards both 1 shot drop with the 168's.
Last edited: