Wolf Gunsmith

6.5

Howard Wolf is in Mifflinburg, PA and his number was---717-966-0449

It may take him a while to get the work done as he is quite busy. I've heard of a year or two wait on some things.

If your wanting a 6.5/284 you might want to contact John Hoover and use his gunsmith instead?
Boyd had a stock done by John Hoover's smith.

Glad to hear you like the 6.5 bore. A popular choice.
Later
DC

[ 05-19-2003: Message edited by: Darryl Cassel ]
 
oops, how imbarrassing my reply was for another post. (there's a first time for everything I gues)
confused.gif
 
I am launching 300 grain sierra's out of a 26" tube of a 338 Lapua mag at a speed of 2735 FPS (chronoed with a Oehler 35P) I have gotten at high as 2800 fps with the 300 grain sierra matchking but pressure was too high so I backed it down, Accuracy is phynominal at my current load.
 
Warning! This thread is more than 21 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top