Win a MagnetoSpeed V3 Barrel Mounted Chronograph - LRH Giveaway

[Andy Backus]

Entry is extremely quick and easy - CLICK HERE TO ENTER - then just enter your first name and email address.

THE PRIZE

MagnetoSpeed V3 Barrel Mounted Chronograph

1 Winner

Street Value - $380

Prize Donor:

Strap. Connect. Shoot. The MagnetoSpeed V3 Ballistic Chronograph is extremely simple to use and is not affected by light related problems so common with traditional chronographs (low sun, bright sun, etc.). The MagnetoSpeed V3 Chronograph attaches to the barrel of your gun eliminating the tripod, long wires and large readout boxes of traditional chronographs. It also means there is no need to go down range for any reason.

CLICK HERE to buy MagnetoSpeed V3 Chronographs at the LRH Store.

The MagnetoSpeed V3 Ballistic Chronograph kit was designed to be used on barrels and suppressors from 1/2 inch all the way up to 2 inches in diameter. In addition to the larger diameter tolerance, the V3 also has one inch more clearance in the blast zone to account for longer (up to 3" in most cases) muzzle brakes, flash hiders, etc.


MagnetoSpeed V3 features an improved design with the following features:

• Improved Display
• Three-button menu system
• Battery options are; (1) 9-Volt or (2) CR123s
• Easy access battery compartment, no need for screwdriver to swap batteries
• Improved shooting modes, with the ability to now operate with air guns
• Downloadable firmware updates
• Advanced data logging and troubleshooting capabilities
• More compact and rugged display housing
• Rapid mode with rate-of-fire
• Redesigned Bayonet
• Rugged strapping system; with metal buckle and triad thumb nut
• Proven technology with updated sensor design
• New profile and color scheme
• New bracket to allow for future alternative attachment options
• Dual data connection points

Kit includes:

• Display Unit
• Retractable connection cable
• Standard 6ft connection cable
• Stainless steel blast shield
• Thick and thin rubber V-block spacers
• microSD card with adapter
• Bayonet sensor
• Polymer spacer kit with screw hardware and allen wrench
• Heavy duty strap with thumb nut tightener
• Hard case with custom cut foam
• Alignment rod
• Instructions

See contest rules down below

 

[Andy Backus]

CONTEST RULES

US SHIPPING ONLY

• Contest entries must be in by January 7th at 8AM CDT.
• One entry per person.
• Winners will be chosen by random drawing.
• No purchase necessary.
• Winners will be notified by email. If no response within 7 days, prize will be re-drawn and awarded to the next person.

 

[dgarrett]

This is a great chance for someone to win a must have product.. Thanks Dave

 

[wpwarren]

I'd love to win one of these. I'm in

 

[87predator]

I'm in, thanks.

 

[C.O. Shooter]

Yes please! I'm in!

 

[quigley257]

Cool prize! I'm in. Thanks MagnetoSpeed and LRH.

 

[kbaerg]

Count me in as well, thanks.

 

[flytie]

I'm in! Thank goodness I have relatives in Carlsbad, just in case i win ;-)

ft

 

[cateyes71757]

im in thanks

 

[BigTom209]

Been trolling the site for a long time, and was looking at buying a Chronograph when I saw this chance to win one! Pulled the trigger and registered!


I'm in need of one and would love to have this!!


I'm in!

 

[keith8864]

Don't got much money to buy something like this would be nice to win

 

[dAyLiTe]

Count me in !

 

[alseg]

That would make working up loads soooooo much easier.[COL
Thanks for the chance. I'm in.
Allan