Where too from here?

I find just the opposite. Very rarely will a bullet powder combination that wont shoot at all suddenly become great with coal tweaks in my experience. Barnes bullets are an exception because they like a bunch of jump. Seating depth is more a tweaking tool for me. Ymmv.
 
My process is typically find a bullet I want to shoot. Try it with different powders. If I find a good load I will run a seating ladder. Typically I start 10 thou off and go down.
 
If gun checks out nothing wrong I would do a seating test first thing. I always find seating as a course adjustment and powder a fine adjustment

This 👆🏻 + Jud96 recs.

I learned this lesson the hard way. These guys are spot on! You will stop chasing your tail when you do seating depth at mid-range powder charge as first step in load development.

Best wishes!
 
I went to the actual range today and shot off a proper bench. Switched to 162 ELD M.
While not outstanding, everything shot around 1". I'll play with seating depth next.
E95C2840-A0F7-45E4-85C8-B05C7D84F76F.jpeg
E95C2840-A0F7-45E4-85C8-B05C7D84F76F.jpeg
3CC34983-F8B1-4FB4-9069-590DC7BAEE8E.jpeg
4E007A5C-03ED-4D9F-A683-ED7515D2B356.jpeg
771AC58D-6435-477E-9EFA-336B8E3CDEF3.jpeg
 

Attachments

  • FF1DA5D0-A4FA-4C58-BCF7-8524C0FAC8CF.jpeg
    FF1DA5D0-A4FA-4C58-BCF7-8524C0FAC8CF.jpeg
    889.9 KB · Views: 79
Seated the bullets closer to the lands and things came together. 69.5grains of H1000 at 3.425 shoots great!View attachment 217379
These are the results you're looking for. A simple tweak in seating depth can make you go from losing your wits to being a happy man haha. Trust me it was a long hard road before I learned this 😅. Great shooting!
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top