/ Register

Where to purchase a .300 Tomahak reamer???

Discussion in 'Long Range Hunting & Shooting' started by smack, Feb 20, 2002.


Help Support Long Range Hunting by donating:


  1. Feb 20, 2002 #1
    smack

    smack Well-Known Member

    Messages:
    320
    Joined:
    Dec 25, 2001
    I e-mailed Pac-Nor to see if they would chamber in this cartridge.They said they would if I purchased the reamer,But they would keep the reamer a deduct the full amount of the reamer from my gunsmithing bill.

    Landon M.
     
  2. Feb 20, 2002 #2
    Darryl Cassel

    Darryl Cassel Well-Known Member

    Messages:
    1,757
    Joined:
    May 7, 2001
    Hello

    Contact Ray Romain, he can tell you where he got his from.

    814-265-1948
     
  3. Feb 20, 2002 #3
    daveosok

    daveosok Guest

    I got my reamer from Dave Manson. http://www.mansonreamers.com/

    Ask him for the 300 RUM Ultra Improved 35 degree shoulder we used .100 thou freebore after experimenting with .370 thou and found to be a bit to much.

    You need to get a hold of Ray for the dies because you cannot buy them factory direct from Redding as Ray and Carrol hold the rights to them.
     
  4. Feb 21, 2002 #4
    smack

    smack Well-Known Member

    Messages:
    320
    Joined:
    Dec 25, 2001
    Heck might as well have Ray barrel and chamber it.Will he do it or will he just work with certain people.

    Landon M.
     
  5. Feb 21, 2002 #5
    Darryl Cassel

    Darryl Cassel Well-Known Member

    Messages:
    1,757
    Joined:
    May 7, 2001
    Ray will do it and he did get his reamer from Manson I believe.

    Darryl