What's the best 6mm?

Look at the 243 and up. The 6-284 looks very neat ;-)

But why limit you self to 6mm why not a 6.5 or 7mm like 260 or 6.5 creedmoor or 7-08 or a 280 ?
Those will have better barrel live
 
I am a fan of 243AI - I think I has a very good balance of speed, brass quality, availability, barrel life and general functionality.

I am actually working up a new build for a walking rig:
Howa 1500 SA
B&C Medalist stock with 15" LOP
Timney trigger at 2.75 lbs
#4 Broughton 5c barrel 1-7.3 twist at 24"
Talley fixed rings and bases
Zeiss 3-9x50

This is my go to source for my 6mm inquiries:
AccurateShooter.com 6mmBR.com -- Best Guide to Precision Shooting and Precision Rifle Accuracy
 
What a HUGE can of worms you opened on this one!:)

The 6 PPC has won a ton of SR matches. The 6 BR has won alot of 600 yd benchrest matches, but they're attempting to upsize it just a bit for the 1000 yd game. From 6 Dashers and Long Dashers, to 6 BRX to 6X47 Lapua and AI 6X47 Lapua, 6 XC is David Tubbs creation I believe and alot of guys are trying it at 1000. The list goes on and on and on and on.........and I am only remembering a very few at the moment.

Oh, lets go even bigger and there's the 243, 243AI, 6MM Rem. 6mm AI, 6-284, 6-06, 6 WSM.........I am probably forgetting dozens in the mix.

6mm SM, 6mm CM, 243 WSSM, 6mm RSAUM, 6-250 AI, ............?? TONS of em.

I personally know that a 6mm Remington will last a very very long time. Lost count of the number I shot at PD's before it was shot out, but it's not the most accurate 6mm on the line. Gotta go smaller case capacity if you want ultimate precision. Sacrifice a little velocity to get better accuracy and even longer barrel lifelightbulb

FWIW, I am playing with the AI 6X47 Lapua as of most recent. Not saying it's the best, but it's gotta be right in the ballpark. 6XC is just slightly bigger, 6 Dashers are a touch smaller. Seems I read somewhere that the 6 LD has a world record at 1000 yds, but I am going off memory which tends to get distorted sometimes.:D
 
I'm a little bias since I am the learning from the guy below.

Not exactly what you are looking for but the 6dasher is the King of benchrest competition currently. Won more 600-1000yd. national titles than anything else this year. Cleaned up in the spring at the 600 and 1000yd(Terry Balding, Richard Schatz, and Robert Hoppe?? if memory serves couldn't find the article ). nationals in california and did it again in St. Louis at the IBS 600yd. nationals(Richard Schatz).

053.jpg


I got to see his targets in heavy and light gun. He uses the same rifle. The smallest group was .9" and the largest was just over 3". He maintained these groups for almost 90rounds and two days through the course of the match.

The dasher is a improved br case so fireforming is needed. It typically loves RL15 or Varget in the 30-34gr. range. It will send a 105 at 3000-3050fps. It has the ability to shoot in the .1's with very little tuning. However good quality brass is the key. It has amazing ability to agge. or consistently group well. If you are competing with it, and competition is close you barrel life might be in the 2-2500. But in the beginning when Richard used it when no one else did he could get more rounds before rebarrelling. No custom dies needed I bought a redding FL bushing die set for $200.

Richard started using it in 2001 and was the first in competition:
Been in the top 5 rankings since he started
2008 NBRSA 2gun National title 1000yds.
2010 IBS 2gun National title 600yds.
2012 IBS 2gun National title 600yds.
10 World Records in IBS and NBRSA

Richard and Sam Hall have passed this trophy back and forth for five years I think. Sam also uses a dasher if memory serves me. If you know any of them ask. The benchrest bunch are the most helpful people I have ever met. Not to many will disclose helpful hints on success when they know you will be competing against them the next day.
Brent
 
Yeah the 6xc 6-47 and dasher and br is what i was looking at. For those who suggested 6-284 and other big ones like 243ai and 6-06 they would be great but i already have some barrel burners. I think im leaning towards one that dose not need to be fire formed. At this point I will not be competing with it just a lot of shooting practice for cheap,rock chucks,yotes,ect.
 
I'm a little bias since I am the learning from the guy below.

Not exactly what you are looking for but the 6dasher is the King of benchrest competition currently. Won more 600-1000yd. national titles than anything else this year. Cleaned up in the spring at the 600 and 1000yd(Terry Balding, Richard Schatz, and Robert Hoppe?? if memory serves couldn't find the article ). nationals in california and did it again in St. Louis at the IBS 600yd. nationals(Richard Schatz).

053.jpg


I got to see his targets in heavy and light gun. He uses the same rifle. The smallest group was .9" and the largest was just over 3". He maintained these groups for almost 90rounds and two days through the course of the match.

The dasher is a improved br case so fireforming is needed. It typically loves RL15 or Varget in the 30-34gr. range. It will send a 105 at 3000-3050fps. It has the ability to shoot in the .1's with very little tuning. However good quality brass is the key. It has amazing ability to agge. or consistently group well. If you are competing with it, and competition is close you barrel life might be in the 2-2500. But in the beginning when Richard used it when no one else did he could get more rounds before rebarrelling. No custom dies needed I bought a redding FL bushing die set for $200.

Richard started using it in 2001 and was the first in competition:
Been in the top 5 rankings since he started
2008 NBRSA 2gun National title 1000yds.
2010 IBS 2gun National title 600yds.
2012 IBS 2gun National title 600yds.
10 World Records in IBS and NBRSA

Richard and Sam Hall have passed this trophy back and forth for five years I think. Sam also uses a dasher if memory serves me. If you know any of them ask. The benchrest bunch are the most helpful people I have ever met. Not to many will disclose helpful hints on success when they know you will be competing against them the next day.
Brent

Everything he said!!!! EXCEPT!! The very last statment. Every compeditor that I visit with will litteraly hemorage good info to their biggest and closest compeditor, be it match day or at supper the night before.

Of course, I only hang around the BEST!!! :)
 
Sorry guys got a little excited with my post. Love it when the little 6mms win. Especially when 11years ago they weren't even considered competition if you were shooting one. All of the above mentioned are great calibers.

Sorry but I ment they will gladly give information. I just didn't write it correctly. I wouldn't be half the shooter I am if it wasn't for all the information they have given me.


Brent
 
4Xforfun I know you are no stranger to those trophies also!!!! And did quite well in St. Louis too. I can see how you mistook my statement sorry.

So when am I going to get a chance to hang around you and get beat? I also need a quote.


Brent
 
6 Dasher for sure is the way to go, excellent brass (Lapau) I shot one for several yrs at 600 yds and now use it for ground hogs and it still shoots 3/8" at 200 yds w/ 105 Bergers and Varget powder w/ 205 primers. I would not hesitate to use it to shoot deer w/ the 105's.
 
Sorry guys got a little excited with my post. Love it when the little 6mms win. Especially when 11years ago they weren't even considered competition if you were shooting one. All of the above mentioned are great calibers.

Sorry but I ment they will gladly give information. I just didn't write it correctly. I wouldn't be half the shooter I am if it wasn't for all the information they have given me.


Brent

Now...you are 100% correct!!

You want a Quote....OK.....

NOW HEAR THIS........... "THIRTY-THIRTY IS THE BEST IN THE BUSH".

Ok, I actually stole that quote from a guy in the local bar. A group of guys (farmers) hanging around talking farm equipment......9610, 1680, 9510, ect... The guy just walks up cauz he wants to be part of the group...figures they were talking guns since it was hunting season and he didn't understand the numbers they were using. He waited for the oportune time and said......."......."

A GOOD LAUGH WAS HAD BY (almost) ALL. :D
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top