What Primer in MK 248 Mod 1

The information from the crane website does not specify. I would venture a guess that it is the GM215M Magnum since Federal has the contract. You might try the GM215M mag primer and the GM210M LR primer and see which gives a lower extreme spread. If the 210m does you might have to increase powder to attain the same velocity.
 
In the Specs page I found they stated Large Rifle Primer Nickle........I guess Fed 210 Match .......

220 MK
H1000 @ 77.7
FC military brass


very hot round........better at 77.0 with CCI BR-2 primer
 
Last edited:
Yes the MK 248 Mod 1 I heard production was put on hold due to excessive pressures.
Same problem they had with MK 118 LR and RL 15.

I run 77.1 of h1000 which is hot enough for me
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top