Just purchased a Sako 75 stainless/synthetic 300WM. I put a Leupold 4.5-14X40 tactical with the 1" tube. Is this enough scope (adjustments) to go ou to 1000 yds if I wanted too? I was looking at the 4.5-14X50 tactical with the 30mm tube, but it was going to have to be raised up quite a bit and the person selling me the gun said that was not a good thing on such a powerful gun?? Is that true? If I went back and got that 30mm tube scope what should I be using for rings, mounts etc? If I do change scopes should I be looking at a higher magnification in the 30mm tube?
Also, do I need to be looking at any bedding on this stock, I ran a piece of paper between the barrel and stock, it was fairly tight but I could still do it. Trigger is 3lb pull that I can adjust down, so I should not need any trigger work, right?
Any other info you can give me would be great. Thank you.
Also, do I need to be looking at any bedding on this stock, I ran a piece of paper between the barrel and stock, it was fairly tight but I could still do it. Trigger is 3lb pull that I can adjust down, so I should not need any trigger work, right?
Any other info you can give me would be great. Thank you.