baldhunter
Well-Known Member
168gr Nosler Ballistic Tip.That load ran 2804fps out of my 26" barreled Sako A7 rifle.
Using small rifle primers or larger rifle magnum primers in 308 win
- Thread starter SamuelBerryhill308
- Start date
Help Support Long Range Hunting Forum
We make all our hunting loads with Magnum prinmers. Up to 65 grains CCI 250 over that Fed 215. The magnum primers work much better at -45. We work up the loads from the start with Mag primers. Have not used a benchrest or standard primer in anything but straight target rifles for over 50 years.
My 308 is 47 grains of IMR 4895, WW brass, Barnes 130 TTSX and a CCI 250 for 3150 FPS. Never lost a case to pocket expansion, some have a dozen firings on them.
My 308 is 47 grains of IMR 4895, WW brass, Barnes 130 TTSX and a CCI 250 for 3150 FPS. Never lost a case to pocket expansion, some have a dozen firings on them.
SamuelBerryhill308
Well-Known Member
Thanks everyone for the info.ive been looking at cci 450 or cci 400 primers and alpha srp brass have found lupua Palma brass as well but then ill have to remember changing decaping pins out.these are the two primers and brass I can find
