-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Ultrasonic case cleaning destructive?
- Thread starter cynicrit
- Start date
Help Support Long Range Hunting Forum
Sounds like BS to me. I'll be interested in learning how an ultrasonic cleaner could damage brass cartridge cases. A fella could always add a cleaner to the solution that damages cases. Other than that, it's as gentle as life ever gets.
The only cleaning solution I add is food grade Citric Acid. And I've read that Citric Acid actually enhances the corrosion resistance of the brass cartridge cases. Sounds like a win-win.
The only cleaning solution I add is food grade Citric Acid. And I've read that Citric Acid actually enhances the corrosion resistance of the brass cartridge cases. Sounds like a win-win.
Last edited:
bigngreen
Well-Known Member
The cleaner can hooch up cases but that's not an ultra sonic issue.
Laelkhunter
Well-Known Member
Jewelers use ultrasonic cleaners to clean fine jewelry worth thousands of dollars. I doubt that it could cause damage to a brass cartridge case. As others have mentioned, the cleaning solution might make the biggest difference. Make sure nothing contains ammonia that you put in there.
rootie3
Active Member
I've read of people adding a small amount of vinegar to the batch. Now this could be harmful if not monitored closely.
Corey Schwanz
Well-Known Member
I've heard plenty of horror stories of people using the wrong type of cleaning solution and messing up the cleaning unit itself. But the act of ultra sonic cleaning shouldn't hurt the brass in any way.
Thank you. Once again, lots of helpful input. The rumor I heard was to the effect that the brass wold rub together and wear down, and actually get pitting n spots from the "micro cavitation" that knocks the dirt off. A fellow reloaded showed me a website where they made these claims, with pictures and everything. Seemed like B.S.,but I thought I'd get some trustworthy input.
MudRunner2005
Well-Known Member
I've cleaned thousands and thousands of cases with my Ultrasonic cleaner, and at pretty high temps for extended periods of time...And no issues here.
I guess if you could get the temp over 200º for really long periods of time, it might could (possibly) cause some sort of damage? But I've never seen any.
