twist rate in sendero

remmy1187

Member
Joined
Nov 3, 2011
Messages
16
I have a remington sendero in 300 weatherby and am trying to find out for sure what the twist is. All info ive found say either 10 or 12. Anyone know for certain? thanks
 
Place a cleaning rod down the bore from the muzzle end and let it come out the chamber end. Screw a loop on the end with a tight fitting patch. Pull it back into the bore a little. Take a marking pin and place a dot mark right at the muzzle edge on the cleaning rod. Pull the rod out until the dot on the rod makes one full rotation. Measure from the muzzle to the dot. If it is 10" then you have a 10" twist if it is 12" you have a 12" twist.
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top