TL3, 7SAUM, 6 CREED, MANNERS T5A

Discussion in 'Sold/Expired' started by HonkeyMcGee, Sep 6, 2018.

  1. HonkeyMcGee

    HonkeyMcGee Active Member

    Messages:
    37
    Joined:
    Oct 27, 2016
    I have a TL3 set up with a few barrels that I am considering parting with. All barrels were done by Red Beard Gun Works out of Portland, TX
    Stock is a Manners T5A elite fill with barricade chassis, atlas rail/bipod, 4 flush cups, badger efr, and an RRS plate to go into the barricade stop slot. I do not have the barricade stop as I only uses this slot for the RRS plate.
    Scope is a Vortex AMG mil/mil with the EBR-7B reticle and Nightforce ultralite rings.
    It will come with all 3 bolt heads, a 24" Proof CF 7 SAUM barrel, 26" Benchmark 6 Creed(set back), and a 14.5" pinned and welded 6x45(SpecWar brake)
    The proof barrel has less than 300 rounds on it, 6creed has 120 (this was a 28" barrel that I set back after 1500rds), 6x45 was done off a burnt out 6mm, probably haven't put 300 rounds through it.

    I will also include whatever mags I have: 2 - 10rd AICS that have the spring cut to feed smoother, 2 ARC mags, 2 Magpul AICS mags, 2 Accurate Mags(.223), and one AICS 5 rd mag that has been opened up for running the SAUM which will hold 3 rds.

    The only parts of this I would consider parting out are the scope and stock, or possibly selling it without the proof barrel. I am not in any dire need to sell this, I just have some other ideas I feel like messing with, so prices are firm.
    AMG - $2100 with a set of NF rings.
    Manners - $1400
    Complete rifle - $6500
    Without Proof - $5,750
    I'll cover $50 on shipping and insurance, any more will be on buyer.

    You can call or text anytime at 361-523-3624 with any questions.

    [​IMG]
     
  2. HonkeyMcGee

    HonkeyMcGee Active Member

    Messages:
    37
    Joined:
    Oct 27, 2016
    Bump
     
  3. HonkeyMcGee

    HonkeyMcGee Active Member

    Messages:
    37
    Joined:
    Oct 27, 2016
    Bump
     
  4. joshf303

    joshf303 Well-Known Member

    Messages:
    342
    Joined:
    Dec 22, 2008
    Damn, that's about as good as it gets. Kyle and those guys down there build some hammers too......
     
    HonkeyMcGee likes this.