Clay Target Guy
Well-Known Member
I have a Bartlein 3B contour barrel that it is a 24 inch barrel. The brass is ADG, and I have 150 rounds. 2 of the 50 round boxes are still sealed. The barrel was done by a local smith that only does work for friends and family but he is very good. Of the one box that is open, 25 rounds have been shot, 15 are new unprimed, 9 are loaded with a starting load that were left over from the barrel break in, and 1 round is a dummy round in the die box. I will pull the bullets on the starting loads so that will give you a total of 125 new brass.
For the barrel, dies, (Hornady with bushing), brass, I will take $550.
I have 1000 Nosler custom competition 77 gr bullets that I would sell for $165 or I have 1000 Hornady 88 gr ELD-M that I will sell for $225.
I do not want to split this up at this time. Pictures to follow shortly. Cost posted so first "I will take it" gets it based on time stamp.
Prices are shipped in the USA.
Thanks
John
For the barrel, dies, (Hornady with bushing), brass, I will take $550.
I have 1000 Nosler custom competition 77 gr bullets that I would sell for $165 or I have 1000 Hornady 88 gr ELD-M that I will sell for $225.
I do not want to split this up at this time. Pictures to follow shortly. Cost posted so first "I will take it" gets it based on time stamp.
Prices are shipped in the USA.
Thanks
John
Last edited:
