Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
The PRC die "problem"
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Alex Wheeler" data-source="post: 2143923" data-attributes="member: 101859"><p>Do not forget, this chamber design will not fix a bad die. This chamber allows you to make a die that will work with hard brass like ADG. The die still has to be in spec or the clickers will eventually come back. Also, be aware that if you have fired brass to the point of clicking, and your die was out of spec, you may not be able to salvage that brass. Brass has to be maintained from the start, its very tough to bring it back once oversized.</p></blockquote><p></p>
[QUOTE="Alex Wheeler, post: 2143923, member: 101859"] Do not forget, this chamber design will not fix a bad die. This chamber allows you to make a die that will work with hard brass like ADG. The die still has to be in spec or the clickers will eventually come back. Also, be aware that if you have fired brass to the point of clicking, and your die was out of spec, you may not be able to salvage that brass. Brass has to be maintained from the start, its very tough to bring it back once oversized. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
The PRC die "problem"
Top