Tack Driving Piercision Rifles, 30-28 Nosler, Kelbly Atlas L.A., Proof, Manners EH1 Elite

[Ron Milby]

I am selling my tack driving Piercision Rifles, 30-28 Nosler with a 26" Proof 9" twist barrel, Kelbly Atlas LA, Manner's EH1 Elite in Swamp Camo, Bix'n Andy Tacsport Pro 2 stage trigger, Piercision titanium 5 port muscle brake, and Atlas bipod and Arca rail. The action has less than 700 rounds through it. It started as a 28 Nosler in 2107 and then in 2018-2019 I had Ryan rechamber it to the 30-28 Nosler. This barrel only has less than 200 rounds through it. The target below that is a "shoot-n-see" style with the tape measure was shot at 304 yards. The steel target with the $20 bill was at 952 yards. It is an accurate rifle. I nicked named the rifle "Thor" because of the way it puts down and hammers animals. It loves the 215 Berger Hybrid, with 85.7 grains of H1000, with a CCI 250 primer, in ADG brass seated about .030 off the lands moving @ 3060 fps. This is one of my easiest rifles to tune. The reason I am selling is that Ryan built me a 300 Norma Imp and this rifle has been sitting in my gun safe for over a year. Someone else needs to be able to use this rifle.

The rifle is topped with a Nightforce NXS 5.5-22x56 F2 scope with the MOAR reticle. Ryan bedded the NF in NF Ultralite rings and NF bubble. I am willing to sell the rifle without the scope. I have other scope options if the buyer is interested. I have a Kahles k318i with the SKMR3 reticle in NF Ultralite rings and a NF bubble and a NF NX8 4-32x50 F1 with the MOAR reticle in NF Ultralite rings with a NF bubble.

I am also willing to swap out the Bix'n Andy Tacsport Pro 2 stage trigger with a Jewel single stage or a Triggertech Diamond single stage.

I have a Whidden 28 Nosler full length bushing sizing die modified by Ryan to size 30-28 Nolser brass and a 30 Nosler Redding Competition Seating die. I also have 100+ pieces of 28 Nosler ADG necked up and fired formed for this rifle's 30-28 Nosler chamber.

Rifle Only: $3,000
NF NXS 5.5-22x56 F2 MOAR and rings and bubble: $1,500
NF NX8 4-32 F1 MOAR and rings and bubble: $2,000
Kahles k318i SKMR3 and rings and bubble: $2,500
Dies and Brass: $300

I am willing to entertain any reasonable offers and package deals.

 

[Nevrsummr]

Are you shooting a right hand rifle left handed?

 

[Ron Milby]

Yes I am. Manner's has the right hand light weight cheek pieces available. Precision Rifles might have and extra right hand one around as well. Or, you can remove the light weight cheek piece and use a wrap around comb. I used the wrap around comb before I had Ryan install the light weight cheek piece.

 

[Ron Milby]

This rifle, NXS, dies, and brass are Sold Pending Funds. All PM's have been answered. Thanks for your interest and inquiries.

 

[cb4128]

pm sent, please put me 2nd in line if it doesn't go through!