Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Stuck 243 in the RCBS full length resizer die
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Teri Anne" data-source="post: 2289292" data-attributes="member: 118816"><p>I did have one issue many years ago with a stuck 30-06 case, was most likely my fault, not enough lube on the pad or whatever else reason.I removed the die from the press and lightly camped it into a vise then took the decapping/neck resizing pin out the top of the die. I inserted a new primer in the case to fill the primer pocket (Primer was going to be junk anyway after I was done. I filled the cavity in the die/case with WD40 and left it overnight and found that some WD40 had leaked out. Took a short length of 1/8 welding rod stuck it down into the die and tapped lightly with my brass hammer. It only took a couple of light taps and the stuck case popped out. Worked well, however in a Blonde moment did not think to place any paper towels or anything underneath the case in the vise. End result was WD40 on the toe of my left shoe and on the floor which fortunately was concrete. LOL...if you use this method don't forget the lesson learned by my Blonde Moment. <img class="smilie smilie--emoji" loading="lazy" alt="👩🦰" title="Woman: red hair :woman_red_haired:" src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f469-1f9b0.png" data-shortname=":woman_red_haired:" /></p></blockquote><p></p>
[QUOTE="Teri Anne, post: 2289292, member: 118816"] I did have one issue many years ago with a stuck 30-06 case, was most likely my fault, not enough lube on the pad or whatever else reason.I removed the die from the press and lightly camped it into a vise then took the decapping/neck resizing pin out the top of the die. I inserted a new primer in the case to fill the primer pocket (Primer was going to be junk anyway after I was done. I filled the cavity in the die/case with WD40 and left it overnight and found that some WD40 had leaked out. Took a short length of 1/8 welding rod stuck it down into the die and tapped lightly with my brass hammer. It only took a couple of light taps and the stuck case popped out. Worked well, however in a Blonde moment did not think to place any paper towels or anything underneath the case in the vise. End result was WD40 on the toe of my left shoe and on the floor which fortunately was concrete. LOL...if you use this method don't forget the lesson learned by my Blonde Moment. 👩🦰 [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Stuck 243 in the RCBS full length resizer die
Top