Stripped t nut in stock

Briant_az

Briant_az

Well-Known Member
Joined
Dec 28, 2014
Messages
186
Location
Chandler, AZ
Last year I had my gunsmith put a pic rail on the friend of a Manners stock. I decided I wanted to change it out for something else. I started to unscrew it and the t but inside the stock is just spinning in circles now.
Short of cutting the bolt, is there any other way to get it out?
Also once I get it out and put the new rail on, how do I secure the t-nut it the stock again? Epoxy?
Any help that you guys could give me would be greatly appreciated!
 
8x68s

8x68s

Well-Known Member
Joined
Apr 9, 2019
Messages
639
Location
Salem, Oregon
epoxy it from the t-nut side. if necessary after, you get it out, ream out and re-epoxy for continuing security.
 
6.5saum/300rum

6.5saum/300rum

Well-Known Member
LRH Team Member
Joined
Dec 5, 2020
Messages
314
Location
montague, ca
Take the stock off and you should be able to hold it from the top with needle nose pliers to take it off. I always epoxy mine in but the gunsmith must not have. Put a new one in with epoxy and let it sit overnight and you should be good.
 

Similar threads

W
Replies
6
Views
5K
Wrcassell21
W
R
Replies
8
Views
3K
Punisher
Punisher
B
Replies
69
Views
10K
Will83
W
ovastafford
Replies
1
Views
1K
ovastafford
ovastafford
J
Replies
3
Views
2K
JF7mmRUM
J

Recent Posts

Top