Does anyone have any experience with Starline's rifle brass yet? Not finding a whole lot out there about it. I'm specifically looking at .260rem and .280ai. I wonder how it compares to Hornady since they both are making these calibers now and about the same price.....
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Starline Rifle Brass
- Thread starter Dirty45
- Start date
Help Support Long Range Hunting Forum
D
Deleted member 46119
Guest
I didn't know they were making rifle brass for modern cartridges. This is great.
I have very positive results with *-* brass for a variety of handgun and old style rifle.
7mm-08 is on clearance at Midway. $0.40 to my door.
Weight sort
Neck it down to an ID of .265
Neck turn
Trim
Champher and debur
Anneal
Neck down to an ID of .260
Load
I'll try that.
I have very positive results with *-* brass for a variety of handgun and old style rifle.
7mm-08 is on clearance at Midway. $0.40 to my door.
Weight sort
Neck it down to an ID of .265
Neck turn
Trim
Champher and debur
Anneal
Neck down to an ID of .260
Load
I'll try that.
bigedp51
Well-Known Member
- Joined
- Dec 10, 2010
- Messages
- 1,022
I use their pistol brass and have no complaints, but I haven't tried their rifle brass.
read post #2 at the link below
Starline .308 brass (also Google "Starline's rifle brass quality" for more info)
https://forum.snipershide.com/forum/snipers-hide®-advance-marksmanship-unit/sniper-s-hide-reloading/6322217-starline-308-brass
Post #2
03-22-2017, 04:02 PM
I picked up 250pcs of the Starline when it first came out. It's good stuff. Two firings on them and I've only had to trim a few (FL sizing). The primer pockets are great, and very little material came out on the uniformer. They are thicker at the base and you'll need to reduce your loads to compensate. I'd say they're on par with Nosler or Lapua brass.
read post #2 at the link below
Starline .308 brass (also Google "Starline's rifle brass quality" for more info)
https://forum.snipershide.com/forum/snipers-hide®-advance-marksmanship-unit/sniper-s-hide-reloading/6322217-starline-308-brass
Post #2
03-22-2017, 04:02 PM
I picked up 250pcs of the Starline when it first came out. It's good stuff. Two firings on them and I've only had to trim a few (FL sizing). The primer pockets are great, and very little material came out on the uniformer. They are thicker at the base and you'll need to reduce your loads to compensate. I'd say they're on par with Nosler or Lapua brass.
