Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Split group problem with ELDX
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Canhunter35" data-source="post: 1445255" data-attributes="member: 101677"><p>I have a 300wby and use the 212eldx in it with h1000. Works great, the node is at 2825fps and does about .75moa with 16es at 82gr of h1000</p><p>I made another load with 200eldx, found a good node at 2990fps with 12 or so es and 86gr of h1000. It's better hunting load, inside of 600 has the advantage.</p><p>I'm pretty sure with a vanguard magazine those 212s will be seated inside the ogive, I have mine at 3.63" and they just fit. What you can do is buy replacement bottom metal from cdi and extend your vanguards magazine to 3.7", mine is being done right now.</p><p>stick with h1000, I've tried 7828 and 7977, 7828 works great but is temp sensitive, 7977 fills the case too much.</p><p></p><p>Your neck tension will be contributing to a wide es. Take ur fired brass, place the butt in an 9/16(I think) socket, slowly rotate with an impact and have a flame from a propane torch pointed at the neck. Rotate as the blue line of annealling moved down the case body about 1/2" then drop the case into water. Let dry then tumble followed by resize then the remaining case prep.</p></blockquote><p></p>
[QUOTE="Canhunter35, post: 1445255, member: 101677"] I have a 300wby and use the 212eldx in it with h1000. Works great, the node is at 2825fps and does about .75moa with 16es at 82gr of h1000 I made another load with 200eldx, found a good node at 2990fps with 12 or so es and 86gr of h1000. It’s better hunting load, inside of 600 has the advantage. I’m pretty sure with a vanguard magazine those 212s will be seated inside the ogive, I have mine at 3.63” and they just fit. What you can do is buy replacement bottom metal from cdi and extend your vanguards magazine to 3.7”, mine is being done right now. stick with h1000, I’ve tried 7828 and 7977, 7828 works great but is temp sensitive, 7977 fills the case too much. Your neck tension will be contributing to a wide es. Take ur fired brass, place the butt in an 9/16(I think) socket, slowly rotate with an impact and have a flame from a propane torch pointed at the neck. Rotate as the blue line of annealling moved down the case body about 1/2” then drop the case into water. Let dry then tumble followed by resize then the remaining case prep. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Split group problem with ELDX
Top