• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

SOLD/EXPIRED Sold 338 Lapua Ackley 40 Degree

  • Thread starter Deleted member 8840
  • Start date
D

Deleted member 8840

Guest
338 Lapua Ackley
Aztec Arms 338 Tactical Custom Action
30 Inch Brux Barrel 9.3 Twist Threads match to action
McMillian Stock with Pillars and Full Bedding
Burguss Super Mag Muzzlebrake
50 MOA Base
It will be Cerakoted (pics show it not done yet)
3950.00
Pics show a 6 x 25 x 56 Millet scope with 140 moa of adjustment for 600.00
I've fire formed 10 rounds and it shot under 1/2 inch moa.
Will work up load and sightin out to 2500 and check drop table and send 25 rounds and dies for 250.00
If you would like a different scope, I will install it for cost prepaid or you can send your scope and it will be installed.
 

Attachments

  • IMG_0007 (4).jpg
    IMG_0007 (4).jpg
    100.7 KB · Views: 34
  • IMG_0008 (4).jpg
    IMG_0008 (4).jpg
    59.3 KB · Views: 34
  • IMG_0010 (3).jpg
    IMG_0010 (3).jpg
    111.4 KB · Views: 29
  • IMG_0011 (3).jpg
    IMG_0011 (3).jpg
    84.9 KB · Views: 31
Re: WTS 338 Lapua Ackley 40 Degree

The metal was made by Aztec to fit in the Mcmillian stock that was inletted for there action, and it uses a Accurate Mag magazine. It holds five rounds.
 
Re: WTS 338 Lapua Ackley 40 Degree

16 - 17 lbs depending on scope
 
Re: WTS 338 Lapua Ackley 40 Degree

It has a Shilen trigger and it is set at 2.5 lbs. Also the custom dies are done and they will be 325.00 not 250.00. Will including working up the load. The dies were made with the chamber reamer and die reamer that were used on the rifle so they match. I will post a pic of the dies later.
 
Re: WTS 338 Lapua Ackley 40 Degree

I'm posting a pic of the custom dies. There are full length bushing die and seater. A micro seater can be added.
 

Attachments

  • IMG_0001.jpg
    IMG_0001.jpg
    142.5 KB · Views: 29
Re: WTS 338 Lapua Ackley 40 Degree

The Millet scope has been sold. I'm also showing the pricing again so it will not be confusing and it is at it's lowest.
The rifle with brake and Cerakote (its being done now) 3700.00
Custom Reloading Dies 295.00
Would put a scope on it(one you send or one I buy at cost for you) and sight it in with 25 rounds (Nosler brass) for 100.00
This pricing is firm and I can not go lower. Thanks
 
Re: WTS 338 Lapua Ackley 40 Degree

Here are the pics after it was Cerakoted. The rifle is ready to ship.
 

Attachments

  • IMG_0002.jpg
    IMG_0002.jpg
    110.5 KB · Views: 31
Re: WTS 338 Lapua Ackley 40 Degree

I've shot out to 2000 yards and the scope tracks fine. It seems to be a very good scope for the price. And it does have 140 MOA of adjustment. It shot under MOA out to a mile.
 
Top