Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Shotguns
Smith & Wesson 916 Shotgun
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="mcnanysa" data-source="post: 2186966" data-attributes="member: 115008"><p>The "weeping and gnashing of teeth" part... bolt and action bar removal...</p><p></p><p>Flip the firearm up so the open side of the receiver is facing up.</p><p>[ATTACH]271241[/ATTACH]</p><p></p><p>Remember that big screwdriver you used to remove the stock bolt? You're going to need it again.</p><p></p><p>With your fingers, move the bolt forward until you can see the notch in the receiver and the bolt lined up as shown, and gently pry up on the rear of the bolt with your large screwdriver so that the rear of the bolt begins to pass through the notch in the receiver:</p><p>[ATTACH]271242[/ATTACH]</p><p><strong><u>Notes </u>: the bolt is not to be removed this way,</strong> we are only prying it up to clear the two-piece action bar. The bolt will be removed from the rear of the receiver. Also, this should not take much prying force. If you feel as though you are exerting a lot of force on the screwdriver, stop, review the picture for proper bolt/receiver alignment, and try again.</p><p></p><p>With the bolt in this position, the rear portion of the two-piece action bar is accessible.</p><p>[ATTACH]271242[/ATTACH]</p><p></p><p>With a small flat-blade screwdriver or pick, pull the rear portion of the action bar away from the receiver</p><p>[ATTACH]271243[/ATTACH][ATTACH]271244[/ATTACH]</p><p></p><p>With a bit of luck, it should pull away and you can lay it aside.</p><p>[ATTACH]271245[/ATTACH]</p><p></p><p>Finally, press the bolt back down into the receiver, and slide it to the rear and remove it.</p><p>[ATTACH]271246[/ATTACH][ATTACH]271247[/ATTACH]</p></blockquote><p></p>
[QUOTE="mcnanysa, post: 2186966, member: 115008"] The "weeping and gnashing of teeth" part... bolt and action bar removal... Flip the firearm up so the open side of the receiver is facing up. [ATTACH]271241[/ATTACH] Remember that big screwdriver you used to remove the stock bolt? You're going to need it again. With your fingers, move the bolt forward until you can see the notch in the receiver and the bolt lined up as shown, and gently pry up on the rear of the bolt with your large screwdriver so that the rear of the bolt begins to pass through the notch in the receiver: [ATTACH]271242[/ATTACH] [B][U]Notes [/U]: the bolt is not to be removed this way,[/B] we are only prying it up to clear the two-piece action bar. The bolt will be removed from the rear of the receiver. Also, this should not take much prying force. If you feel as though you are exerting a lot of force on the screwdriver, stop, review the picture for proper bolt/receiver alignment, and try again. With the bolt in this position, the rear portion of the two-piece action bar is accessible. [ATTACH]271242[/ATTACH] With a small flat-blade screwdriver or pick, pull the rear portion of the action bar away from the receiver [ATTACH]271243[/ATTACH][ATTACH]271244[/ATTACH] With a bit of luck, it should pull away and you can lay it aside. [ATTACH]271245[/ATTACH] Finally, press the bolt back down into the receiver, and slide it to the rear and remove it. [ATTACH]271246[/ATTACH][ATTACH]271247[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Shotguns
Smith & Wesson 916 Shotgun
Top