nealm66 Well-Known Member Joined Jul 6, 2020 Messages 1,401 Location washington Dec 3, 2021 #15 Maybe check with a no go gauge. Might need to tighten the barrel in a bit
nealm66 Well-Known Member Joined Jul 6, 2020 Messages 1,401 Location washington Dec 3, 2021 #16 Or you could try the tape trick on a piece of brass if you don't have a gauge. Make sure to check for the difference in length after you put it on.
Or you could try the tape trick on a piece of brass if you don't have a gauge. Make sure to check for the difference in length after you put it on.
Barrelnut Well-Known Member LRH Supporter Joined Dec 16, 2013 Messages 4,951 Location End of the Oregon Trail Dec 3, 2021 #17 It should be close to SAAMI. If it's not, I would call Savage support. Number is on their website. They are actually pretty good....
It should be close to SAAMI. If it's not, I would call Savage support. Number is on their website. They are actually pretty good....
FEENIX Well-Known Member LRH Supporter Joined Dec 20, 2008 Messages 23,964 Location Great Falls, MT Dec 3, 2021 #18 Barrelnut said: It should be close to SAAMI. If it's not, I would call Savage support. Number is on their website. They are actually pretty good.... Click to expand... Agreed!
Barrelnut said: It should be close to SAAMI. If it's not, I would call Savage support. Number is on their website. They are actually pretty good.... Click to expand... Agreed!