The following is for sale:
---Barreled action---$350
- Savage axis action / bolt, tactical bolt handle
- Bison gun works .223 wylde 25" stainless, 1-7 twist, target crown, contour unknown (varmint?) but could provide measurements. Made from a green mountain barrel blank.
- Rifle basix trigger
- 20 moa rail
---Scope $300 ------
- Vortex diamondback tactical 4-16x44 FFP MOA
---Rings $30---
- Warne 30MM Permanent Attach Rings Medium Matte 214M
----- extras make offer ------
- ebay bipod works okay.
- Savior patriot 35" rifle case
- scope bubble level
- 1 ruger 10 round and one mdt 10 round mag.
- I also have several hundred once fired brass cases in .223
- 3 lbs of imr 4895 (local pickup only of course)
- federal small rifle match primers ~600ct (local pickup).
Everything works great, very accurate. Shoots everything from 55 grain to 80eldm just fine. I have only about 300 rounds through it, there was a previous owner who shot under 1000 through it. Always kept clean. I'm selling because of a move.
Can work out shipping and payment if you are really interested. I'm in southern california.
Ask any questions and I'll answer as best as I can.
The images are from when I posted this as a complete rifle but the chassis and other parts sold, here is that post if you want more context: https://www.longrangehunting.com/threads/custom-build-223-wylde-savage-axis.271212/
---Barreled action---$350
- Savage axis action / bolt, tactical bolt handle
- Bison gun works .223 wylde 25" stainless, 1-7 twist, target crown, contour unknown (varmint?) but could provide measurements. Made from a green mountain barrel blank.
- Rifle basix trigger
- 20 moa rail
---Scope $300 ------
- Vortex diamondback tactical 4-16x44 FFP MOA
---Rings $30---
- Warne 30MM Permanent Attach Rings Medium Matte 214M
----- extras make offer ------
- ebay bipod works okay.
- Savior patriot 35" rifle case
- scope bubble level
- 1 ruger 10 round and one mdt 10 round mag.
- I also have several hundred once fired brass cases in .223
- 3 lbs of imr 4895 (local pickup only of course)
- federal small rifle match primers ~600ct (local pickup).
Everything works great, very accurate. Shoots everything from 55 grain to 80eldm just fine. I have only about 300 rounds through it, there was a previous owner who shot under 1000 through it. Always kept clean. I'm selling because of a move.
Can work out shipping and payment if you are really interested. I'm in southern california.
Ask any questions and I'll answer as best as I can.
The images are from when I posted this as a complete rifle but the chassis and other parts sold, here is that post if you want more context: https://www.longrangehunting.com/threads/custom-build-223-wylde-savage-axis.271212/
Last edited:
