andrewsben
Well-Known Member
Savage 112 Target Magnum 338 Lapua AI
Built off Savage 112 Taget Magnum action (single shot with target accu-trigger) with Bartlein 5R barrel. Have only put a handfull of rounds through it, mainly just to get some formed brass of the chamber to send off for custom Whidden die set. Had a machinist put an anschutz style rail on it, but although he did great work with the cut, his placement wasn't exactly how I would have done it, no affect on functionality, but have to take rail out, put in accessory/adapter, then reattach. Have a 3d printed 3" plate I'll include with it.
Additional photos in the google drive link below.
Reamer Print in link for google drive
T10559 Bartlein .338 5R 1:9.5 Twist, 30"
PRECISION ARMAMENT - M11 MUZZLE BRAKE 338 CALIBER
Custom Whidden Die set
With custom die setup, asking $1,900, $1,500 without.
Savage 112 Target Magnum 338 Lapua AI
Built off Savage 112 Taget Magnum action (single shot with target accu-trigger) with Bartlein 5R barrel. Have only put a handfull of rounds through it, mainly just to get some formed brass of the chamber to send off for custom Whidden die set. Had a machinist put an anschutz style rail on it, but although he did great work with the cut, his placement wasn't correct, no affect on functionality, but would need 1 end opened up to allow for putting attachments in.
Additional photos in the google drive link below.
Chambered with PTG Reamer - Print in link for google drive
T10559 Bartlein .338 5R 1:9.5 Twist, 30"
PRECISION ARMAMENT - M11 MUZZLE BRAKE 338 CALIBER
Custom Whidden Die set
With custom die setup, asking $1,900, $1,500 without.
drive.google.com
yTkWEuW43Y7oPhVmoufT1Yd?usp=sharing
Built off Savage 112 Taget Magnum action (single shot with target accu-trigger) with Bartlein 5R barrel. Have only put a handfull of rounds through it, mainly just to get some formed brass of the chamber to send off for custom Whidden die set. Had a machinist put an anschutz style rail on it, but although he did great work with the cut, his placement wasn't exactly how I would have done it, no affect on functionality, but have to take rail out, put in accessory/adapter, then reattach. Have a 3d printed 3" plate I'll include with it.
Additional photos in the google drive link below.
Reamer Print in link for google drive
T10559 Bartlein .338 5R 1:9.5 Twist, 30"
PRECISION ARMAMENT - M11 MUZZLE BRAKE 338 CALIBER
Custom Whidden Die set
With custom die setup, asking $1,900, $1,500 without.
Savage 112 Target Magnum 338 Lapua AI
Built off Savage 112 Taget Magnum action (single shot with target accu-trigger) with Bartlein 5R barrel. Have only put a handfull of rounds through it, mainly just to get some formed brass of the chamber to send off for custom Whidden die set. Had a machinist put an anschutz style rail on it, but although he did great work with the cut, his placement wasn't correct, no affect on functionality, but would need 1 end opened up to allow for putting attachments in.
Additional photos in the google drive link below.
Chambered with PTG Reamer - Print in link for google drive
T10559 Bartlein .338 5R 1:9.5 Twist, 30"
PRECISION ARMAMENT - M11 MUZZLE BRAKE 338 CALIBER
Custom Whidden Die set
With custom die setup, asking $1,900, $1,500 without.
338AI - Google Drive
drive.google.com
Attachments
Last edited:
